Weha Shop Equipment
Weha shop equipment includes work tables, routers, powered polishers, anchoring tools, countertop reinforcement and sink installation supplies. Compare power or air requirements, connections and included tooling, and match replacement parts to your equipment, or explore all Weha collections.
Here you will find:
- Weha Work Tables & Shop Support: Work Tables & Stands; Table Parts & Shop Support.
- Weha Routers & Powered Polishers: Routers & Surface Polishers; Air Polishers & Grinders.
- Weha Anchoring & Stone Chiseling Tools: T-31 Anchoring System; Stone Chisels & Parts.
- Weha Installation & Shop Supplies: Supports, Clips & Rodding; Aprons & Sleeve Protectors.
Weha Work Tables & Shop Support
Compare expandable tables, fabrication stands, trestles and sink-cutout supports. Replacement tops, pedals and casters are grouped with shop support components, including the waste container.
- Work Tables by Weha
Weha Rotating Trestle Star
Weha Rotating Trestle Star The Weha Rotating Trestle Star Adjustable Sculpture stand is the best adjustable stone sculpting stand on the market.
- Very tough frame construction
- 2¾” diameter center thread spindle for easily adjusting the height, even with large stone sculptures on it.
- A built-in braking system to stop the table at any location.
-
- Work Tables by Weha
Weha 28″ Work Table with White Rubber Top
Weha 28″ Work Table with White Rubber Top is made specifically for fabricating Granite, Marble, Quartz, and other stone countertops.
- The Weha Work table comes with 4 swivel casters with locks.
- This model also comes with 4 lock-down foot pedals to keep the worktable from rolling and moving during fabrication.
Brands Carousel
Weha Expandable Scissor Table
Watch the expandable scissor table demonstration and compare its support arrangement with the other work tables above.
Weha Routers & Powered Polishers
Explore the Rock Dog router and Pig planetary polisher, followed by pneumatic polishers and the water-feed grinder. Review the required power or air supply and the tooling supported by the selected machine.
- Weha Routers & Polishers
Weha “Pig” Planetary Polisher 350 VS With Donkey Package
- Dual-action planetary system (three heads + full-body rotation) delivers fast, even, swirl-free finishes.
- Works wet or dry with dual water system: hose connection and onboard reservoir with control valves.
- Compatible with 4″, 5″, and 6″ pads (6″ preferred) using standard 5/8-11 thread for versatility.
- Full 14″ clearance maximizes diamond-to-surface contact for higher polishing efficiency.
- Includes 6″ Donkey Package for complete honing, scratch removal, and factory-quality polishing.
- Three brass-thread snail-lock backup pads included for secure pad attachment.
- Removable rubber water skirt helps control spray and maintain a clean workspace.
- Weha Routers & Polishers
Weha Rock Dog Router Single Speed
- More Powerful 3.5 HP Motor (previously 2.4 HP) – nearly 50% more power and improved energy efficiency
- Geopolymer Frame – superior vibration absorption and operator safety
- Stainless Steel Spindle – for better durability and corrosion resistance
- Improved Motor Positioning – now center-mounted for better balance
- Larger Flat Belt – smoother and quieter power transmission
- Water Filtration System – transparent filter for easier maintenance
- Professional Water Skirt – upgraded water control and cleaner look
- Solid State Relay & LED Buttons – longer life, improved safety, and visibility
- Labeled Electrical Cables – for faster troubleshooting
- Weha Pneumatic Tools
Weha Speedy Side Exhaust Center Water Feed Air Polisher
- Comes with Wrench, side handle, water guard, air hose, and water hose.
- Side Exhaust.
- The Weha Speedy Water Feed Granite Air Polisher is made with upgraded premium bearings to run 24 hours a day.
- The great thing about the Weha Speedy Water Feed Air Polisher is that it runs off of 16cm. This means it will not slow down or lose power during the polishing process.
- At 5,000 RPM, the Weha Speedy granite Air Polisher is one of the fastest polishers on the market.
- With the weight at only 2.6 lbs, the fabricator can run this wet air polisher all day without having user fatigue.
- Weha Pneumatic Tools
Weha Blizzard Rear Exhaust Center Water Feed Air Polisher
- The Blizzard Granite Air polisher is a Rear Exhaust Air polisher that does not lose power during the granite and stone polishing process.
- The Blizzard Center Water Feed stone polisher comes with 2 hoses. 1 for air. 1 for water. Both feed on the back of the tool.
- The nice advantage of Rear Exhaust Air polishers is the fact that air is not blowing on the hands or the potential of blowing oil onto the surface of the stone and creating a stain.
- Still, very lightweight at only 3.5 lbs, the Weha Blizzard Rear Air Polisher is easy to handle and will not create user fatigue.
- Weha Pneumatic Tools
Weha High-Speed Water feeds Air Grinder & Cutter WH185
- The Weha WH185 can also be run without water as well.
- The Weha WH185 comes with a paddle trigger to have complete control over the air cutter at all times. Also, the WH185 has a solid handle to keep cutting and grinding easy with less fatigue.
- The WH185 Air Cutter is made to work with a 5″ blade to cut granite, marble, quartz, quartzite, stone materials.
- The great thing is that it uses less air than other air grinders. It only requires 9.8 CFM at 90 PSI.
Brands Carousel
Weha Pig Planetary Polisher on Black Granite
The manufacturer demonstrates the Pig polisher with Donkey abrasives on black granite. The video illustrates the machine and a specific polishing sequence.
Weha Anchoring & Stone Chiseling Tools
Find the T-31 anchor machine and related bits, fasteners and replacement components. The second tab contains the stone chisel and its service parts for matching the tool to the intended fabrication task.
- Stone Anchor Machines & Parts
Weha T-31 Diamond Anchor Bit
The T-31 3/16″ Diamond Anchor Bit will make perfect Anchor slots in marble, granite, quartz, engineered stone, concrete, and other natural or man-made stone.
- The T-31 3/16″ Diamond Anchor Bit will make perfect Anchor slots in marble, granite, quartz, engineered stone, concrete, and other natural or man-made stone.
- How fast will the Weha T-31 Anchor Machine make a slot? Different materials will vary. Using the Weha T-31 Anchor Machine Anchor Slot times for Marble is between 10-15 seconds. And for Granite and Quartz: 25-30 seconds.
- How many anchor slots will the Weha Diamond Anchor Bit cut? Depending on materials the T-31 Diamond Anchor Bit will get between 100-150 slots before it needs to be replaced.
-
Brands Carousel
Weha T-31 Anchor Machine Kit
See the T-31 system and its tooling in the manufacturer demonstration. Check the kit contents and individual replacement-part listings before ordering.
Weha Installation & Shop Supplies
Browse countertop and sink supports, clips and rodding products together. Aprons and sleeve protectors appear in a separate tab so installation hardware and protective shop supplies are easy to compare.
- General Fabrication Accessories
Weha Yellow Rodding Stand
The Weha Yellow Rodding Stand works perfectly for white fiberglass rodding and the Weha Carbon Fiberglass Rodding. The real advantage of the Yellow Rodding Stand over others is the ability for it to ship broken down for much less expensive shipping charges.
- The Yellow Rodding Stand breaks down for less expensive shipping. Easy 5 min assembly.
- The Yellow Rodding Stand will hold rodding up to 330′ rolls.
- Stable, sturdy construction of painted steel.
- General Fabrication Accessories
Weha Carbon Fiber Rodding Bar
- Weha Carbon Fiberglass Rodding can be used on: granite, marble, engineered stone, quartz, limestone, and all-natural stones.
- Weha Carbon Fiberglass Rodding is a patent-pending sold exclusively by Weha.
- Weha Carbon Fiber Rodding is the best rodding material for rodding granite and stone countertops.
- Weha Carbon Fiberglass Granite rodding will never rust and create granite stains.
- Because the Weha Carbon Fiberglass Rodding has the highest concentration of fiberglass over other granite rodding, the glue will bond not only to the stone but also to the fiberglass rodding
- General Fabrication Accessories
Weha Carbon Fiber Rodding Roll
- It comes in 328′ (100meters) rolls.
- The Carbon Fiber Rodding roll is 29″ in diameter to fit all rodding stands.
- With the Carbon Fiberglass rodding only being ⅜” high, it will work perfectly for 3cm applications.
- Weha Carbon Fiberglass Rodding can be used on: granite, marble, engineered stone, quartz, limestone, and all natural stones. It can also be used on concrete countertops as well.
- Weha Carbon Fiberglass Rodding is a patent-pending sold exclusively by Weha.
- General Fabrication Accessories
Weha Steel Carbon Fiber Rodding
- Using steel without the side effects of steel
- Combines Steel, Fiberglass, and Carbon Fiberglass for extreme strength
- No Rusting
- Comes in 330′ rolls vs having long bars of steel laying in the shop
- Adhesive groves for stronger glue bond
- True 8 strand fiberglass
- General Fabrication Accessories
Weha White Rodding
- White Rodding Will not rust over time.
- White Rodding will mechanically bond to the adhesive rather than just surrounding it like metal rodding.
- The labor and time savings by not having to clean grind each metal granite rod is more than enough to offset the costs of the fiberglass rodding.
- Fiberglass rodding is one of the strongest materials that can be used to increase load tolerance and deflection up to 1600%!
- Fiberglass rodding greatly increases safety.
- If a piece of stone breaks during an install with fiberglass rodding, the stone stays intact.
- Therefore no employees are injured nor any damages to the floor will need repairing.
- Anchoring and More
Weha Countertop Support Brace
- Each Countertop Support Brace bracket comes with 6 countersink holes. The provided screws will finish flush with the support brace. Each 8″ Counter Top Support Brace Bracket is powder coated gloss black for a high-end black polished finish.
- One edge of the countertop brace is flat and the other end is back beveled with slightly rounded corners. There are no sharp edges for the homeowner to scratch or cut themselves. And the bevel provides a nice touch transition from the bracket to the stone.
- Weha produces the Counter Top Support Bracket at 2 ½” wide. This width gives plenty of structural support. And when placed at seams it gives a full 1 ¼” wide support on each piece of stone.
- Anchoring and More
Weha Pop-it Universal Sink Clip
- Made out of heavy-duty gauge stainless steel, the Weha Pop-it Universal Sink Clip will not rust or fatigue over time.
- If the sink ever needs to come out or be replaced, simply loosen the screw and the Weha Pop-it will come out and can be reused to mount the new replacement sink.
- No glue is necessary.
- 50 per bag.
- Will work with Sink Rims up to 1″ thick.
- Anchoring and More
Weha Sink Setter
- You no longer have to notch the top of the cabinets.
- There are plates that attach to the sides of the cabinets. This allows the bracket to be installed before or after the countertops.
- The new Sink Setter brackets allow you to replace a sink easily by lowering the leveling bolts to take the brackets out if the sink needs to be replaced.
- The new Sink Setter brackets allow you to re-set a sink in existing countertops.
- Includes two (2) heavy-duty Sink Setter bars – adjustable to 26” and all leveling bolts & screws.
-
- General Fabrication Accessories
Weha Black Rubber Sleeve Protectors
The Black Rubber Sleeve Protectors are the latest version in full sleeve water protection. The soft expandable rubber near the wrists makes these sleeves super comfortable and keeps the water from coming up the arm.
- Also, the waterproof sleeve protectors are made to come all the to the shoulder for full arm protection
- Add the adjustable strap that goes behind the back and the sleeves will stay fully upon the shoulder
- Combine this with the Weha Apron and you will stay fully dry from the shoulder/chest, all the way down to your feet
- General Fabrication Accessories
Weha Heavy Duty Gray Apron
- The Weha Apron fits comfortably under the arm and around the body. This keeps it close to the body from arms down to the legs.
this provides easier movement and the best water protection. - At 46″ in length, it fits the average fabricator just perfectly. This length covers the boot well but still leaves enough space from the floor to keep it from touching
- The Weha Apron with its crossed straps in the back truly provide the best comfort for all-day wear.
- With a thicker, more durable material, the Apron will last 3-5 times longer than most aprons on the market.
- The interior of the Weha Apron is not rough or scratchy for additional comfort.
- Although this Apron is more expensive, it will be the most comfortable waterproof apron you will wear.
- The Weha Apron fits comfortably under the arm and around the body. This keeps it close to the body from arms down to the legs.
- General Fabrication Accessories
Weha Velcro Apron
- The Weha USA Water Proof Aprons come with 2 strips of hook & loop down the front to hold diamond polishing pads, felt pads, and other hook and loop items
- With zippered pockets with waterproof flaps on each side allow the fabricator to store useful items
- Dimensions: 34″ x 48″
- Color: Black
-
Brands Carousel
Weha Carbon Fiber Rodding Bar
The manufacturer introduces its carbon-fiber rodding bar for countertop fabrication.
Brands Carousel
Choose Weha for Your Stone Fabrication Workflow
- Equipment organized by task: Move from work support to powered tools, anchoring and installation supplies.
- Clear separation of tools and parts: Compare complete machines with the components needed to maintain the same equipment.
- Connected abrasive selection: Dedicated diamond-tool and polishing-pad pages make compatible tooling easier to locate.
Explore Weha Shop Equipment at USA Granite Tools
Explore the Weha Shop Equipment selection at USA Granite Tools. Compare the products in each section, then open the product page for current options, specifications and availability.
Weha Shop Equipment — FAQs
Answers about Weha Shop Equipment, product selection and compatible accessories.
This page includes work tables and stands, the Rock Dog router, the Pig planetary polisher, pneumatic tools, the T-31 anchoring system, stone chisels and selected installation supplies.
Air polishers are powered tools. Polishing pads are abrasives fitted to a compatible tool and backer pad. Browse the separate Polishing Pads page for abrasive systems and holders.
No. The T-31 section contains the machine kit as well as separate bits, fasteners and replacement components. Check the product title and listed contents.
They remain on the main Weha Material Handling page. Use the Lifting button to browse those tools.
Match the equipment model, original part number, dimensions and connection details. Table tops, casters and machine components should be checked against the specific equipment.
Included tooling varies by product and package. Review the listed contents; additional router bits and polishing pads are available through their dedicated Weha pages.
Explore all five collections on the Weha Products overview.
For additional product information, visit the Weha product catalog from Tenax USA.