Diamond Abrasives
Diamond Abrasives Categories
Explore Brand PagesDiamond Abrasives
Showing 145–156 of 585 results
-
-
Bridge Saw Blades by Weha
Weha Grey Leopard 16” Reinforced Bridge Saw Blade
- The 4.5mm thick Reinforced Core offers a solution for dedicated miter cuts.
- The Grey Leopard Reinforced Diamond Bridge Saw blade is made specifically for doing miter cuts. It will not fatigue for the entire life of the blade.
- The Grey Leopard will make perfect vertical cuts as well with no problems.
- With the European style split segment, 2 segments per landing, It cuts through stone extremely clean and fast.
- The dual 20mm x 20mm segment heights on the Weha GR 29 Split Segment Diamond Bridge Saw Blades offer outstanding life.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard will rank as one of the fastest and best diamond bridge saw blades for quartzite, granite, and quartz stone.
-
Bridge Saw Blades by Weha
Weha Puma Bridge Saw Blade
The Puma Bridge Saw Blade is a 25mm segment height blade for cutting quartz, granite, and engineered stone. Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
- This layered Arix diamond segment design provides fast, clean cutting to achieve optimum performance from the bridge saws. This translates into faster cutting using lower amps.
- With a 25mm diamond segment height, the Puma Diamond Bridge Saw Blade is designed to maximize the life and cut between 200-250 slabs, depending on the materials.
- Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
-
Bridge Saw Blades by Diamax
Cyclone Ultra Blade
- Minimal upkeep; limited dressing
- Excellent finish for straight AND miter cuts
- Silent steel core for noise reduction and cutting efficiency
- Precision factory dressing and diamond bonding for minimal load while cutting
- Donatoni, Denver, & Breton pin holes standard
-
Bridge Saw Blades by Diamax
Cyclone Ultra Silent Core Blade (V2)
- New bond and diamond concentration make cuts fast and chip-free
- Designed for use on sintered stone and porcelain panels
- New reinforced core allows for stable miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,200 for the 14″ variation and 2,000 for the 16″ one
- For Wet Cut only
- These blades also can be used to cut Glass, Ultra-Compact, and Porcelain/Tile
-
Bridge Saw Blades by Diamax
Super Cyclone Porcelain Blade
- Category 5 Speeds!
- High-quality diamond for the sharpest edge on Dekton
- 15% thinner segment to create faster and cleaner cuts!
- Precision factory dressing so you never have to!
- Thin segment with reinforced core for perfect miter edges
- Donatoni, Denver, Breton pin holes standard on 16″ blade
-
Bridge Saw Blades by Diamax
Cyclone Low HP Silent Core Blade
Cyclone Low HP Silent Core Blade is specially designed for the Blue Ripper, Achilles TSA, or any portable track saw device, sporting Silent Core for Noise Reduction.
- First-ever low horsepower (LH) blade designed with a silent core
- Designed for the Achilles, Blue Ripper, TSA or any portable track saw device
- Special soft bond cuts super hard material with ease
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Quartzite Wet Only -
-
Bridge Saw Blades by Weha
Weha Grey Leopard Bridge Saw Blade
The Grey Leopard Bridge Saw Blade is a Split Segment Silent Core Diamond Bridge Saw Blade made to remove slurry fast, keep tons of water between the segments and stone, and cut fast and clean.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard is made with a specially designed stiff core that is much more rigid than standard silent core blades. This allows perfectly straight cuts on miters without the blade walking.
- The Grey Leopard will rank as one of the fastest and best diamond bridge saw blades.
-
-
Bridge Saw Blades by Weha
Weha White Lion Quartzite Bridge Saw Blade
- 60mm Arbor, 20mm Segment.
- The White Lion Bridge Saw blade bond was made specifically for cutting Quartzite stone. Granite and Engineered Stone will be cut at even a faster speed than other granite bridge saw blades.
- ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for as long of a life as possible when cutting Quartzite, granite, and engineered stone
- Depending on the Quartzite, Cutting speed with the White Lion Bridge Saw blade will be in the 5-10 ft per minute range for cutting Quartzite. It is always best to watch the amps on the saw to see the best cutting speed when cutting quartzite.
