Diamax bridge saw blades include Cyclone and Hurricane models for granite, engineered stone, quartzite, marble, porcelain and sintered slabs. Compare material-specific blades for straight or miter cuts, including silent core and low horsepower options. Match the blade diameter, arbor and cutting requirements to your saw and material.
Bridge Saw Blades by Diamax
Bridge Saw Blades by Diamax Categories
Bridge Saw Blades by Diamax
Showing 1–12 of 13 results
-
- Bridge Saw Blades by Diamax
Cyclone QZT Quartzite Blade
- All new bond built for speed & reliability!
- Segment designed to keep a square edge during miter cuts.
- Best blade in the industry to reduce production bottlenecks with fast cuts and clean edges.
- Only one pass is needed! See speed and feed rates below for single-pass cutting.
- Bridge Saw Blades by Diamax
Cyclone S Super Q Silent Core
- The blade can be used for straight and miter cuts with minimal noise
- Reinforced core allows for miter cuts up to 40% of the speed of straight cuts
- U-shaped segment design for faster speed and no glazing
- Feed rate: Maximum rate of 118”/min on quartzite
- Bridge Saw Blades by Diamax
Cyclone S Silent Core Reinforced Blade
- Now one blade for straight cuts and miters
- The new reengineered segment gives faster, cleaner, and straighter miter cuts
- New Reinforced core does not flex or lose tension when cutting miters
- Miter or straight cut clean edges on material ranging from marble to quartzite (proper dressing is needed when cutting different materials with varying densities)
- Bridge Saw Blades by Diamax
Cyclone Silent Core Blade
The Cyclone Silent Core Blade is designed to cut Engineered Stone, Granite, or Marble with a Bridge Saw. It cuts smoothly, with minimal chipping.
- Segments are pressure tested to ensure solid welding
- Cyclone high-speed patterned technology provides fast cutting
- Feed rate: 10 ft – 17 ft a minute
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Marble Wet Only - Bridge Saw Blades by Diamax
Hurricane Silent Core Blade
- Category 5 Speeds!
- Cost-effective High-performance blade.
- Versatile segment for fast cutting from Quartzite to Engineered Stone
- Same performance from a 10-25 hp saw.
- Capable of high feed rates with 2,000 + RPMs!
- The highest ROI of any blade on the market!
CAN BE USED ON
MATERIALS
USE
Bridge Saw Quartzite, Granite, Engineered Stone Wet Only - Bridge Saw Blades by Diamax
Cyclone Marble Silent Core Blade
- Designed with a specific marble bond segment
- Segments contain a higher concentration of smaller grit diamonds to ensure chip-free clean cutting
- The silent core feature reduces noise significantly
- Performs clean and straight miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,000 for the 14″ variation and 1,800 for the 16″ one
-
- Bridge Saw Blades by Diamax
Cyclone Ultra Blade
- Minimal upkeep; limited dressing
- Excellent finish for straight AND miter cuts
- Silent steel core for noise reduction and cutting efficiency
- Precision factory dressing and diamond bonding for minimal load while cutting
- Donatoni, Denver, & Breton pin holes standard
- Bridge Saw Blades by Diamax
Cyclone Ultra Silent Core Blade (V2)
- New bond and diamond concentration make cuts fast and chip-free
- Designed for use on sintered stone and porcelain panels
- New reinforced core allows for stable miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,200 for the 14″ variation and 2,000 for the 16″ one
- For Wet Cut only
- These blades also can be used to cut Glass, Ultra-Compact, and Porcelain/Tile
- Bridge Saw Blades by Diamax
Super Cyclone Porcelain Blade
- Category 5 Speeds!
- High-quality diamond for the sharpest edge on Dekton
- 15% thinner segment to create faster and cleaner cuts!
- Precision factory dressing so you never have to!
- Thin segment with reinforced core for perfect miter edges
- Donatoni, Denver, Breton pin holes standard on 16″ blade
