Weha Dekton Bridge Saw Blade
Weha Dekton Bridge Saw Blade is top-of-the-line sintered stone, porcelain slab blades that will provide the cleanest cut and longest life of any other Dekton Bridge Saw Blade on the market today. Weha has used a premium German core with the highest diamond content matrix bond to provide the absolute best blade to cut Dekton, Neolith, and other Ultra-Compact sintered stone materials.
You might also want to take a look at our other Bridge Saw Blades by Weha.
Bridge Saw Blades designed specifically for Dekton, Neolith, and Sintered Stone:
- These bridge saw blades were built specifically for Dekton, Neolith, and sintered porcelain slabs.
- Made with a 10mm diamond height rim, very close segments to prevent chipping, and a diamond matrix bond specifically for these types of hard materials.
- Weha has produced a blade that will perform exceptionally well on thin or thick porcelain and sintered stone.
Dekton Bridge Saw Blade Prices
There are a wide variety of prices out there for Dekton Bridge Saw Blades. Weha set aside a price target. We didn’t build a blade with the idea of being the cheapest. Does that make Weha the cheapest Dekton Bridge Saw Blade? For sure it does not. But we are within 10%-15% of the lowest, still being very price competitive. Weha blades will give you 10%-20% more life. Would you agree that your cost per foot will virtually be the same? And you get a premium blade that will speed up fabrication and production. In the end, you get a better Dekton Bridge Saw Blade and not pay more for it.
Technical Specifications
| Thickness of Material | Straight Cutting* | Plunge Cutting* |
|---|---|---|
| 10-15mm | Feed rate: 40″-55″ per minute | Down Feed Speed: 100mm (4″) per minute |
| 20mm | Feed rate: 24″-32″ per minute | Down Feed Speed: 100mm (4″) per minute |
| 30mm | Feed rate: 20″-24″ per minute | Down Feed Speed: 100mm (4″) per minute |
*RPM: 1,800 for the 14″ diameter blade, 1,600 for the 16″ diameter blade and 1,400 for the 18″ diameter blade
There are no reviews yet.