Shop by Brand
Explore Featured Brands
Learn more about the trusted brands available in this category.
BladesGS
Showing 1–15 of 21 results
-
- Bridge Saw Blades by Diamax
Cyclone QZT Quartzite Blade
- All new bond built for speed & reliability!
- Segment designed to keep a square edge during miter cuts.
- Best blade in the industry to reduce production bottlenecks with fast cuts and clean edges.
- Only one pass is needed! See speed and feed rates below for single-pass cutting.
- Bridge Saw Blades by Diamax
Cyclone S Super Q Silent Core
- The blade can be used for straight and miter cuts with minimal noise
- Reinforced core allows for miter cuts up to 40% of the speed of straight cuts
- U-shaped segment design for faster speed and no glazing
- Feed rate: Maximum rate of 118”/min on quartzite
- Bridge Saw Blades by Diamax
Cyclone S Silent Core Reinforced Blade
- Now one blade for straight cuts and miters
- The new reengineered segment gives faster, cleaner, and straighter miter cuts
- New Reinforced core does not flex or lose tension when cutting miters
- Miter or straight cut clean edges on material ranging from marble to quartzite (proper dressing is needed when cutting different materials with varying densities)
- Bridge Saw Blades by Diamax
Cyclone Silent Core Blade
The Cyclone Silent Core Blade is designed to cut Engineered Stone, Granite, or Marble with a Bridge Saw. It cuts smoothly, with minimal chipping.
- Segments are pressure tested to ensure solid welding
- Cyclone high-speed patterned technology provides fast cutting
- Feed rate: 10 ft – 17 ft a minute
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Marble Wet Only - Bridge Saw Blades by Diamax
Hurricane Silent Core Blade
- Category 5 Speeds!
- Cost-effective High-performance blade.
- Versatile segment for fast cutting from Quartzite to Engineered Stone
- Same performance from a 10-25 hp saw.
- Capable of high feed rates with 2,000 + RPMs!
- The highest ROI of any blade on the market!
CAN BE USED ON
MATERIALS
USE
Bridge Saw Quartzite, Granite, Engineered Stone Wet Only - Bridge Saw Blades by Diamax
Cyclone Marble Silent Core Blade
- Designed with a specific marble bond segment
- Segments contain a higher concentration of smaller grit diamonds to ensure chip-free clean cutting
- The silent core feature reduces noise significantly
- Performs clean and straight miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,000 for the 14″ variation and 1,800 for the 16″ one
-
- Bridge Saw Blades by Weha
Weha Grey Leopard 16” Reinforced Bridge Saw Blade
- The 4.5mm thick Reinforced Core offers a solution for dedicated miter cuts.
- The Grey Leopard Reinforced Diamond Bridge Saw blade is made specifically for doing miter cuts. It will not fatigue for the entire life of the blade.
- The Grey Leopard will make perfect vertical cuts as well with no problems.
- With the European style split segment, 2 segments per landing, It cuts through stone extremely clean and fast.
- The dual 20mm x 20mm segment heights on the Weha GR 29 Split Segment Diamond Bridge Saw Blades offer outstanding life.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard will rank as one of the fastest and best diamond bridge saw blades for quartzite, granite, and quartz stone.
- Bridge Saw Blades by Weha
Weha Puma Bridge Saw Blade
The Puma Bridge Saw Blade is a 25mm segment height blade for cutting quartz, granite, and engineered stone. Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
- This layered Arix diamond segment design provides fast, clean cutting to achieve optimum performance from the bridge saws. This translates into faster cutting using lower amps.
- With a 25mm diamond segment height, the Puma Diamond Bridge Saw Blade is designed to maximize the life and cut between 200-250 slabs, depending on the materials.
- Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
- Bridge Saw Blades by Diamax
Cyclone Low HP Silent Core Blade
Cyclone Low HP Silent Core Blade is specially designed for the Blue Ripper, Achilles TSA, or any portable track saw device, sporting Silent Core for Noise Reduction.
- First-ever low horsepower (LH) blade designed with a silent core
- Designed for the Achilles, Blue Ripper, TSA or any portable track saw device
- Special soft bond cuts super hard material with ease
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Quartzite Wet Only - Bridge Saw Blades by Weha
Weha Grey Leopard Bridge Saw Blade
The Grey Leopard Bridge Saw Blade is a Split Segment Silent Core Diamond Bridge Saw Blade made to remove slurry fast, keep tons of water between the segments and stone, and cut fast and clean.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard is made with a specially designed stiff core that is much more rigid than standard silent core blades. This allows perfectly straight cuts on miters without the blade walking.
- The Grey Leopard will rank as one of the fastest and best diamond bridge saw blades.
- Bridge Saw Blades by Weha
Weha White Lion Quartzite Bridge Saw Blade
- 60mm Arbor, 20mm Segment.
- The White Lion Bridge Saw blade bond was made specifically for cutting Quartzite stone. Granite and Engineered Stone will be cut at even a faster speed than other granite bridge saw blades.
- ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for as long of a life as possible when cutting Quartzite, granite, and engineered stone
- Depending on the Quartzite, Cutting speed with the White Lion Bridge Saw blade will be in the 5-10 ft per minute range for cutting Quartzite. It is always best to watch the amps on the saw to see the best cutting speed when cutting quartzite.
- Bridge Saw Blades by Weha
Weha Matrix SJ SawJet Bridge Saw Blade
Weha Matrix SJ SawJet Bridge Saw Blade is a premium diagonal layered diamond blade designed to cut fast Quartzite, engineered stone, quartz materials. Also great on marbles.
- Because of the continuous layer of diagonal diamonds, the Weha Matrix SJ will last as long as 20-25mm height blades.
- This unique layered diamond is performing like no other blade on the market.
- Super quiet. Outstanding life.
