Porcelain/Tile
Porcelain/Tile Categories
Porcelain/Tile
Showing 1–12 of 31 results
-
Bridge Saw Blades by Diamax
Cyclone Ultra Blade
- Minimal upkeep; limited dressing
- Excellent finish for straight AND miter cuts
- Silent steel core for noise reduction and cutting efficiency
- Precision factory dressing and diamond bonding for minimal load while cutting
- Donatoni, Denver, & Breton pin holes standard
-
Bridge Saw Blades by Diamax
Cyclone Ultra Silent Core Blade (V2)
- New bond and diamond concentration make cuts fast and chip-free
- Designed for use on sintered stone and porcelain panels
- New reinforced core allows for stable miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,200 for the 14″ variation and 2,000 for the 16″ one
- For Wet Cut only
- These blades also can be used to cut Glass, Ultra-Compact, and Porcelain/Tile
-
Bridge Saw Blades by Diamax
Super Cyclone Porcelain Blade
- Category 5 Speeds!
- High-quality diamond for the sharpest edge on Dekton
- 15% thinner segment to create faster and cleaner cuts!
- Precision factory dressing so you never have to!
- Thin segment with reinforced core for perfect miter edges
- Donatoni, Denver, Breton pin holes standard on 16″ blade
-
Turbo Blades by Diamax
Cyclone Ultra Mesh Turbo Blade
- New edition to the Cyclone Ultra line-up
- The blade is designed to cut Ultra-Compact surfaces at a fast speed with minimal chipping
- Ultra-thin rim assures a fast clean cut
- Turbo mesh design allows for optimal cooling
- Center hub reinforcement keeps the blade cutting straight
-
Porcelain/Tile Blades by Diamax
Cyclone Continuous Rim Blade
- The most versatile blade that cuts granite, marble, porcelain, and ceramic tile
- Also used widely in countertop fabrication for granite, engineered stone, and marble
- Ideal for cleaning seams and preparing material for miter joints
- Available in 4, 4.5, 5, 6, 7, 8, 10, 12, and 14″ diameter sizes
- Slotted for more aggressive cutting with minimal chipping (Except 10″)
- Blades 12″ or longer are wet cutting only
-
-
Contour Blades by Diamax
Cyclone Electroplated Contour Blade
- Contour shape designed for curve cutting and sink cut-outs
- Redesigned with vortex side protection for smoother cutting
- Ideal for cutting Marble, Porcelain/Tile, or Ultra-compact
- Advanced and highly secretive production process separates Cyclone electroplated products from the rest
- Cyclone Electroplated Contour Blade is designed for curve cutting and sink cut-outs
- Can reach 12,000 RPM
- Arbor size: 5/8″ – 7/8″
-
Marble Blades by Diamax
Cyclone Electroplated Marble Blade
- Thin core design allows for sharp, clean cuts in all marbles
- The secret electroplating process separates this blade’s performance from all others
- For straight cuts only
- Available in 4, 4.5, 5, 6, and 7″ diameter sizes
- Maximum RPM varies from 8,730 to 15,000 depending on the size of the blade
-
Dry Polishers By Diamax, Dry Polishers, Wet Polishers, Wet Polishers By Diamax
Cyclone Ultra Wet/Dry Polishing System
Dry Polishers By Diamax, Dry Polishers, Wet Polishers, Wet Polishers By DiamaxCyclone Ultra Wet/Dry Polishing System
- Maximum diamond concentration content allows these pads to polish Ultra-compact and porcelain tile edges very efficiently
- Great flexibility for tight radius work
- Light-colored resin minimizes bleeding
- Wet or Dry use
-
Backer Pads, Backer Pads for Dry Polishing, Backer Pads for Wet Polishing
Cyclone Rigid Backer Pads
- Available in 3″, 4″ and 5″ (76mm, 100mm, and 125mm)
- Rigid for straight edge polishing and soft for ogee like edge polishing
- Super Adhesive used to prevent any separation
- Hard/rigid rubber body
- ⅝”-11 thread [M18x2]
