Bridge Saw Blades
Bridge Saw Blades Categories
Explore Brand PagesBridge Saw Blades
Showing 13–24 of 45 results
-
Bridge Saw Blades by Diamax
Cyclone S Silent Core Reinforced Blade
- Now one blade for straight cuts and miters
- The new reengineered segment gives faster, cleaner, and straighter miter cuts
- New Reinforced core does not flex or lose tension when cutting miters
- Miter or straight cut clean edges on material ranging from marble to quartzite (proper dressing is needed when cutting different materials with varying densities)
-
Bridge Saw Blades by Diamax
Cyclone Silent Core Blade
The Cyclone Silent Core Blade is designed to cut Engineered Stone, Granite, or Marble with a Bridge Saw. It cuts smoothly, with minimal chipping.
- Segments are pressure tested to ensure solid welding
- Cyclone high-speed patterned technology provides fast cutting
- Feed rate: 10 ft – 17 ft a minute
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Marble Wet Only -
Bridge Saw Blades by Diamax
Hurricane Silent Core Blade
- Category 5 Speeds!
- Cost-effective High-performance blade.
- Versatile segment for fast cutting from Quartzite to Engineered Stone
- Same performance from a 10-25 hp saw.
- Capable of high feed rates with 2,000 + RPMs!
- The highest ROI of any blade on the market!
CAN BE USED ON
MATERIALS
USE
Bridge Saw Quartzite, Granite, Engineered Stone Wet Only -
-
Bridge Saw Blades by Diamax
Cyclone Marble Silent Core Blade
- Designed with a specific marble bond segment
- Segments contain a higher concentration of smaller grit diamonds to ensure chip-free clean cutting
- The silent core feature reduces noise significantly
- Performs clean and straight miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,000 for the 14″ variation and 1,800 for the 16″ one
-
-
Bridge Saw Blades by Diabü
DIABÜ Yellow Eagle – KERA LINE
- Ceramics, Porcelain, and Glass Cutting
- Great for Dekton® and Neolith®
- Smooth Chip Free cutting due to unique ceramic
cutting segments - Miter and Straight chip-free smooth Cutting
- It can be used for cutting slabs 2.5 mm to
30 mm thickness - Made in Germany”
-
-
Bridge Saw Blades by Weha
Weha Grey Leopard 16” Reinforced Bridge Saw Blade
- The 4.5mm thick Reinforced Core offers a solution for dedicated miter cuts.
- The Grey Leopard Reinforced Diamond Bridge Saw blade is made specifically for doing miter cuts. It will not fatigue for the entire life of the blade.
- The Grey Leopard will make perfect vertical cuts as well with no problems.
- With the European style split segment, 2 segments per landing, It cuts through stone extremely clean and fast.
- The dual 20mm x 20mm segment heights on the Weha GR 29 Split Segment Diamond Bridge Saw Blades offer outstanding life.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard will rank as one of the fastest and best diamond bridge saw blades for quartzite, granite, and quartz stone.
-
Bridge Saw Blades by Weha
Weha Puma Bridge Saw Blade
The Puma Bridge Saw Blade is a 25mm segment height blade for cutting quartz, granite, and engineered stone. Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
- This layered Arix diamond segment design provides fast, clean cutting to achieve optimum performance from the bridge saws. This translates into faster cutting using lower amps.
- With a 25mm diamond segment height, the Puma Diamond Bridge Saw Blade is designed to maximize the life and cut between 200-250 slabs, depending on the materials.
- Puma granite and stone bridge saw blade is made for Bridge Saws with 10+ HP motors.
