Diamax
Diamax Categories
Diamax
Showing 49–60 of 154 results
-
Backer Pads, Backer Pads for Dry Polishing, Backer Pads for Wet Polishing
Cyclone Rigid Backer Pads
- Available in 3″, 4″ and 5″ (76mm, 100mm, and 125mm)
- Rigid for straight edge polishing and soft for ogee like edge polishing
- Super Adhesive used to prevent any separation
- Hard/rigid rubber body
- ⅝”-11 thread [M18x2]
-
Backer Pads, Backer Pads for Dry Polishing, Backer Pads for Wet Polishing
Diamax Backer Plastic RED Backer Pad
Backer Pads, Backer Pads for Dry Polishing, Backer Pads for Wet PolishingDiamax Backer Plastic RED Backer Pad
- Professional-grade backer pad available in 4″ and 5″ sizes
- Compatible with granite, marble, quartz, engineered stone, and natural stone surfaces
- High-strength hard plastic construction for long-lasting durability
- Rigid foam cushioning reduces vibration and improves control
- Provides consistent pressure distribution for smooth polishing and grinding results
- Suitable for flat surfaces, edges, corners, contours, countertops, and decorative stone work
- Designed for both wet and dry polishing applications
-
Contour Blades by Diamax
Cyclone Contour Blade
- Vortex segments designed for faster and smoother cutting
- Side protection helps keep cuts smooth
- Increased segment height for longer life
- Ideal for circular cuts, like opening holes in Sinks or Vanities
- Available in 5″ or 6″ diameter sizes
- With an arbor of 5/8″ – 7/8″, the 5″ blade can be used up to 12,200 RPM, while the 6″ can get up to 10,000 RPM
-
Contour Blades by Diamax
Hurricane Contour Blade
- Perfect balance ensures smooth entry when cutting.
- The turbo-rim design produces safer and sharper cuts than or segmented designed contour blades.
- Fast cutting and long-lasting
- Designed for curved cutting of granite sinkholes
- Arbor size is 7/8″ and reduces to 5/8 with included washer
- Hurricane Contour Blades can be used for Dry or Wet cutting
- These blades feature a very open bond for free cutting on very hard surfaces
-
Glass Blades
Cyclone Glass Blade
- Diamond bond specifically made for glass tile
- For clean and precise cuts in glass
- Cuts glass and white backing chip-free
- Wet use
- 5/8″-11 Arbor Size
- Available in 4.5, 7, and 10″
- You can use the 4.5″ version with an Angle Grinder or a Hand Saw, or use the 7″ or 10″ with a Bridge Saw
-
Glass Blades
Cyclone Ultra Glass Blade
- Professional-grade bridge saw blade for glass, porcelain, and ultra-compact materials
- Delivers fast, clean, and precise cutting performance
- High concentration of fine diamond grit for exceptionally smooth cuts
- Produces clean and straight miter edges with high cutting efficiency
- Designed exclusively for wet cutting applications
- Advanced silent core technology reduces operating noise
- Improves cutting stability and overall efficiency
-
-
Wet Polishers By Diamax
Cyclone Convex Polishing Disks
Cyclone Convex Polishing Disks are Convex Polishing Pads, applicable for angle polishing machines, used to polish the edge of the countertop’s inner hole.
- Pads are useful for ogee edge polishing
- Good for polishing difficult to reach areas like inside corners of sink cutouts
- Velcro backed for use with 3″ (76mm) backer pad
CAN BE USED ON
MATERIALS
USE
Angle Grinder, Pneumatic Machine Engineered Stone, Granite Wet Only -
Dry Polishers By Diamax
Typhoon Dry Polishing System
- The best dry polishing in its class
- When cost is an issue nothing gives you more utility and shine than Typhoon
- 4″ diameter disks with velcro back
- 4,000 maximum revolutions per minute
- Ideal for working with Engineered Stone or Granite
- Wet or Dry use
-
