Router Bits
Here you will find our selection of Router Bits for Profiling the Edges of any Stone, no matter if it is Granite, Marble, Engineered Stone, Porcelain, or any other. You will find Router Bits from Diamax and Weha, including the Oma line.
Router Bits for Profile E (Bevel)
Router Bits, Router Bits By Diamax
Cyclone Bevel Router Bits
The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
Double-breaker bits for full-bull nose prep 3mm diamond depth
50% more diamond surface than the industry standard
Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
8,000 Max RPM
Special shapes, sizes, and grits available upon request
OMA Router Bits by Weha
Oma Bevel E20 Extradiam Pos 3
The Critical bit between the profile and polishing phase of the Oma system of bits.
The first bit without a bearing to fully engage the stone in the polishing process.
An optimum bit before starting the Oma polishing wheels or start with hand polishing.
The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
OMA Router Bits by Weha
Oma Bevel E20 Prodiam Cont Metal Pos 2
The Bevel E20 Prodiam Cont Metal Pos 2 are diamond brazed technology bits that work excellent on marble, limestone, travertine.
Oma Bits are produced in Italy with OMA controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
Router Bits for Profile B (Demi Bullnose aka Half Bullnose)
Router Bits By Diamax
Cyclone Demi Bullnose Router Bits
The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
Double-breaker bits for full-bull nose prep 3mm diamond depth
50% more diamond surface than the industry standard
Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
8,000 Max RPM
Special shapes, sizes, and grits available upon request
Router Bits By Diamax
Hurricane Demi Bullnose Router Bits
Hurricane Demi Bullnose Router Bits, Profile “B”, also known as Radius and Half Bullnose, is a versatile tool to create professional contour on Engineered Stone, Marble, and Granite Countertop Profile Edges.
The New Diamond Bond formula increases Profile preparation speed & reduces profile deformation
Available in Coarse and Medium positions
 |    |  |
CAN BE USED ON | MATERIALS | USE |
| Router | Engineered Stone, Granite, Marble | Wet Only |
Router Bits By Diamax
Hurricane Ogee Demi Bullnose Shape FB Router Bit
New Diamond Bond formula increases Profile Preparation Speed & reduces Profile deformation
For use on portable Stone Router Machines
The first bearing determines the offset for the second tool
Works well with a Single Speed Router
Recommend running speed is 8,000 RPM
Wet only use
6mm layer of diamonds for long tool life
Router Bits for Profile V (Full Bullnose)
Router Bits By Diamax
Cyclone Full Bullnose Router Bits
The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
Double-breaker bits for full-bull nose prep 3mm diamond depth
50% more diamond surface than the industry standard
Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
8,000 Max RPM
Special shapes, sizes, and grits available upon request
Router Bits By Diamax
Hurricane Full Bullnose Router Bits
Continuous impregnated, no Chipping
Excellent on Granite, Marble, and Engineered Stone
Provides a consistent Edge
Fast removal rate
The new diamond bond formula increases profile preparation speed & reduces profile deformation
Available in several sizes and positions
OMA Router Bits by Weha
Oma Full Bullnose V30 Extradiam Pos 3
The Critical bit between the profile and polishing phase of the Oma system of bits.
The first bit without a bearing to fully engage the stone in the polishing process.
An optimum bit before starting the Oma polishing wheels or start with hand polishing.
The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
OMA Router Bits by Weha
Oma Full Bullnose V30 Prodiam Cont Metal Pos 2
The Full Bullnose V30 Prodiam Cont Metal Pos 2 is diamond brazed technology bits that work excellent on marble, limestone, travertine.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
OMA Router Bits by Weha
Oma Full Bullnose V30 Replacement Segments
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
OMA Router Bits by Weha
Oma Full Bullnose V30 Truelife
The Full Bullnose V30 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
Router Bits for Profile F (Ogee)
Router Bits By Diamax
Cyclone Ogee Router Bits
The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
Double-breaker bits for full-bull nose prep 3mm diamond depth
50% more diamond surface than the industry standard
Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
8,000 Max RPM
Special shapes, sizes, and grits available upon request
Router Bits By Diamax
Hurricane Ogee Demi Bullnose Shape FB Router Bit
New Diamond Bond formula increases Profile Preparation Speed & reduces Profile deformation
For use on portable Stone Router Machines
The first bearing determines the offset for the second tool
Works well with a Single Speed Router
Recommend running speed is 8,000 RPM
Wet only use
6mm layer of diamonds for long tool life
Router Bits By Diamax
Hurricane Ogee Router Bits
Excellent on Granite and other Natural Stone
Provides an aggressive Cut and smooth finishes
Fast removal rate
Long life
The new diamond bond formula increases profile preparation speed & reduces profile deformation
Available in several sizes and positions to accommodate a great range of applications
OMA Router Bits by Weha
Oma Ogee F20 Extradiam Pos 3
The Critical bit between the profile and polishing phase of the Oma system of bits.
The first bit without a bearing to fully engage the stone in the polishing process.
An optimum bit before starting the Oma polishing wheels or start with hand polishing.
The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
OMA Router Bits by Weha
Oma Ogee F20 Replacement Segments
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
OMA Router Bits by Weha
Oma Ogee F20 Truelife
The Ogee F20 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
Router Bits for Profile A (Radius)
Vacuum Brazed Profile Bits by Weha
Weha Profiler Radius Vac Brazed Router Bit
Excellent for Marble, Granite, Engineered stone.
The Profiler Radius Vac Brazed Router Bit can be used on handheld tools with a center water feed. May also be used with standard grinders with external water applied.
It comes with a heavy-density rubber guide to prevent scratching on the surface, and a heavy-density rubber guide to prevent scratching on the surface.
The Profiler Radius Vac Brazed Router Bit comes with ⅝”-11 thread for grinders.
3 ½” Diameter for inside bowl holes and inside radius corners.
Recommended RPM: 3,500.
Router Bits for Profile W (Waterfall aka Triple Waterfall)
Router Bits By Diamax
Hurricane Waterfall Router Bits
Hurricane Waterfall Router Bits are intended for creating the Waterfall profile (Shape “W”). They have the highest concentration of Layered Diamonds, which enables extensive tool life.
The New Diamond bond formula increases Profile preparation speed and reduces Profile deformation
Available in 30 mm and coarse, medium, and fine positions
| | |
CAN BE USED ON | MATERIALS | USE |
| Router | Engineered Stone, Granite, Marble | Wet Only |
Router Machines
Our Selection
We also have you covered if you are looking for a Router Machine. Below is our selection of fine, portable, and affordable stone routers.
Stone Routers by Weha
Oma CP99 Routing Machine
60% more horsepower than electric units
Works on Granite, Marble, Engineered Stone, Quartz, and Quartzite Counter Tops.
With aircraft Aluminum and stainless steel construction with fiberglass covers(not plastic), the CP99 is a router that will provide many many years of fabrication work.
Weighing 35 lbs., this compact and lightweight router makes it easier to use, less user fatigue, and easy to move from one work table to another.
Stone Routers by Weha
Weha Rock Dog Router Single Speed
More Powerful 3.5 HP Motor (previously 2.4 HP) – nearly 50% more power and improved energy efficiency
Geopolymer Frame – superior vibration absorption and operator safety
Stainless Steel Spindle – for better durability and corrosion resistance
Improved Motor Positioning – now center-mounted for better balance
Larger Flat Belt – smoother and quieter power transmission
Water Filtration System – transparent filter for easier maintenance
Professional Water Skirt – upgraded water control and cleaner look
Solid State Relay & LED Buttons – longer life, improved safety, and visibility
Labeled Electrical Cables – for faster troubleshooting
Stone Routers, Surface Polishers Machine
Granite Stone Router Beaver
Hydroglading Base.
Plastic material with designed grooves for hydroglading and cooling.
Water nozzles for cooling.
Counterweight and water intake valve.
3 ½ HP Makita motor.
Electronic variable speed 10k – 20k rpm.
Powered with 120 Volts / 15 amps that can be supplied by any household or shop. No 220 Volts wiring or special transformer needed.
