Shop
Showing 2446–2460 of 3245 results
-
-
Pneumatic Wet Tools Machines
STONE Pneumatic Wet Stone Cutter
STONE Pneumatic Wet Stone Cutter, This wet air saw is designed to wet cut granite, marble, quartz stone, engineered stone with air, it could be used with o without water but it is safer when used wet. The wet air stone cutter can accept 5″ (125mm) diamond blade.
-
Pneumatic Wet Tools Machines
Stone Pneumatic Wet Polisher
- Poses no electric hazards.
- Center water feed function reduces dust and improves environmental protection.
- Rear exhaust keeps exhausts away from the stone.
- Center water feed with side exhaust
- Air Cons: 0.22 m3/min 8 CFM minimum 12 CFM optimal
- Air Pressure: 90 psi
- Lightweight, compact
-
Electric Wet Polishers, Pneumatic Wet Tools Machines
ALPHA AIR-680UW Underwater Pneumatic Polisher
- High-Performance, Pneumatic Polisher for Underwater Applications
- Central Water-Feed System Delivers Ample Water Regardless of Position for Plaster Polishing
- No-Load RPM- 4,000
- 15ft. All-Weather Air & Water Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- 30ft. All-Weather Air Hose with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- 27ft. Flexible Exhaust Hose included
- 7″ Rotary Backer Pad, 7″ 50 Grit and 7″ 100 Grit PlasterKing Pads Included
-
Pneumatic Wet Tools Machines
ALPHA AIR-830/AIR-834/AIR-850/AIR-854 Pneumatic Polishers
- High-Performance, Pneumatic Polisher
- Central Water-Feed System Delivers Ample Water Regardless of Position
- No-Load RPM- 5,500 for AIR-850 / 4,000 for AIR-830
- 15ft. All-Weather Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- Newly Developed Motor Produces More Power
- Lightweight and Ergonomically Designed for Better Maneuverability
- New Splash Guard Allows For Better Visibility Without Being Splashed
5/8″-11 is the standard spindle thread size in the United States.
-
Pneumatic Wet Tools Machines
ALPHA PSC-150 Pneumatic Stone Cutter
- 2 HP Pneumatic Powered Motor with Speed Control Governor
- Capable of Miter Cutting 1-1/4″ (3cm) Material With Ease
- Kink-Free Water and Air Hoses for Easy Maneuverability and Reducing Operator Fatigue
- Great For Sink-Hole Cutting, Groove Cutting and Rodding Applications
- 2,000 Hour Duty Cycle
- Comes With an Eclipse II 6” Blade and a bottle of Rust Inhibitor Oil
- Can Be Used Wet or Dry
-
Pneumatic Wet Tools Machines, Variable Speed Grinders
ALPHA PSC-600 Pneumatic Stone Cutter
- High-Performance, Pneumatic Cutting Tool
- Central Water-Feed System Delivers Ample Water Regardless of Position
- No-Load 8,500 RPMs
- 15ft. All-Weather Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- Newly Developed Motor Produces More Power
- Lightweight and Ergonomically Designed for Better Maneuverability
- Spring Return Throttle to Avoid Accidental Start
-
Electric Wet Polishers, Pneumatic Wet Tools Machines
ALPHA PSP-158/114 High-Performance Polisher
- Next Generation Polisher from Alpha®
- High-Performance Industrial Pneumatic Polisher
- Powerful New Motor for Demanding Applications
- Comes With 30′ Kink-Free Twin-Air/Water Hose for Better Maneuverability
- All-Weather Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- Quarter-Turn Switches for Precise Control
- Central Water-Feed System Delivers Ample Water Regardless of Position
-
Pneumatic Wet Tools Machines, Variable Speed Grinders
ALPHA PWC-658/514 Pneumatic Cutter/Grinder
- High-Speed, High-Performance Pneumatic Angle Cutter/Grinder
- Reversible Safety Guard For Left Or Right Blade Position
- L-Bracket & Side Handle Setup For Pull-To-Cut Method
- Side Handle Attachment For Push-To-Cut Method
- Spring-Return Throttle Avoids Accidental Start
- Easy Access Oil Port for Daily Maintenance
- Quad Adapter Center Water-Feed System Provides Direct Water Flow to Front and Back Side Of The Blade
-
Pneumatic Wet Tools Machines
Alpha Pneumatic Wet Polisher AIR 658
- Centrally water-fed distribution system that provides the best finishes possible
- Convenient size, this polisher is the ideal polishing tool for the professional shop worker
- Lightweight tool, with a weight of only 2.64 lbs
- Accepts 3”, 4” or 5” discs
- It is a “plug and play” tool
- With sealed bearings to increase life and a rear exhaust system, is designed to last a long time.
- Requirements for this tool are a cast iron 2 stage compressor, a large reservoir, 5 HP for each tool.
-
Pneumatic Wet Tools Machines
Alpha AIR-300/304 Pneumatic Polisher
- High-Performance, Pneumatic Polishing Tool with A Central Water-Feed System
- No-Load 5,800 RPMs
- Lightweight and Ergonomically Design Reduces Fatigue
- Designed To Easily Maneuver in Small Areas Like Sink Rims and Bowls
- Consumes 10 CFM and Requires 87 PSI
- Only Requires 3 HP Compressor
- Great in The Shop or At The Jobsite
-
-
