Shop
Showing 2017–2028 of 3311 results
-
Waste Bins - Dumpsters, Shop & Installation
Aardwolf Waste Bin 620 PC Powder Coated
The Aardwolf Waste Bin 620 PC Powder Coated is manufactured from 3mm plate. The bottom is reinforced to ensure the long life of the bin. The release mechanism is activated by the forklift operator pulling the draw rope from the driver’s seat
-
General Fabrication Accessories
Weha Carbon Fiber Rodding Bar
- Weha Carbon Fiberglass Rodding can be used on: granite, marble, engineered stone, quartz, limestone, and all-natural stones.
- Weha Carbon Fiberglass Rodding is a patent-pending sold exclusively by Weha.
- Weha Carbon Fiber Rodding is the best rodding material for rodding granite and stone countertops.
- Weha Carbon Fiberglass Granite rodding will never rust and create granite stains.
- Because the Weha Carbon Fiberglass Rodding has the highest concentration of fiberglass over other granite rodding, the glue will bond not only to the stone but also to the fiberglass rodding
-
General Fabrication Accessories
Weha Steel Carbon Fiber Rodding
- Using steel without the side effects of steel
- Combines Steel, Fiberglass, and Carbon Fiberglass for extreme strength
- No Rusting
- Comes in 330′ rolls vs having long bars of steel laying in the shop
- Adhesive groves for stronger glue bond
- True 8 strand fiberglass
-
General Fabrication Accessories
Weha Carbon Fiber Rodding Roll
- It comes in 328′ (100meters) rolls.
- The Carbon Fiber Rodding roll is 29″ in diameter to fit all rodding stands.
- With the Carbon Fiberglass rodding only being ⅜” high, it will work perfectly for 3cm applications.
- Weha Carbon Fiberglass Rodding can be used on: granite, marble, engineered stone, quartz, limestone, and all natural stones. It can also be used on concrete countertops as well.
- Weha Carbon Fiberglass Rodding is a patent-pending sold exclusively by Weha.
-
General Fabrication Accessories
Weha White Rodding
- White Rodding Will not rust over time.
- White Rodding will mechanically bond to the adhesive rather than just surrounding it like metal rodding.
- The labor and time savings by not having to clean grind each metal granite rod is more than enough to offset the costs of the fiberglass rodding.
- Fiberglass rodding is one of the strongest materials that can be used to increase load tolerance and deflection up to 1600%!
- Fiberglass rodding greatly increases safety.
- If a piece of stone breaks during an install with fiberglass rodding, the stone stays intact.
- Therefore no employees are injured nor any damages to the floor will need repairing.
-
General Fabrication Accessories
Weha Yellow Rodding Stand
The Weha Yellow Rodding Stand works perfectly for white fiberglass rodding and the Weha Carbon Fiberglass Rodding. The real advantage of the Yellow Rodding Stand over others is the ability for it to ship broken down for much less expensive shipping charges.
- The Yellow Rodding Stand breaks down for less expensive shipping. Easy 5 min assembly.
- The Yellow Rodding Stand will hold rodding up to 330′ rolls.
- Stable, sturdy construction of painted steel.
-
-
Anchoring and More
Weha Countertop Support Brace
- Each Countertop Support Brace bracket comes with 6 countersink holes. The provided screws will finish flush with the support brace. Each 8″ Counter Top Support Brace Bracket is powder coated gloss black for a high-end black polished finish.
- One edge of the countertop brace is flat and the other end is back beveled with slightly rounded corners. There are no sharp edges for the homeowner to scratch or cut themselves. And the bevel provides a nice touch transition from the bracket to the stone.
- Weha produces the Counter Top Support Bracket at 2 ½” wide. This width gives plenty of structural support. And when placed at seams it gives a full 1 ¼” wide support on each piece of stone.
-
Anchoring and More
Weha Pop-it Universal Sink Clip
- Made out of heavy-duty gauge stainless steel, the Weha Pop-it Universal Sink Clip will not rust or fatigue over time.
- If the sink ever needs to come out or be replaced, simply loosen the screw and the Weha Pop-it will come out and can be reused to mount the new replacement sink.
- No glue is necessary.
- 50 per bag.
- Will work with Sink Rims up to 1″ thick.
-
Anchoring and More
Weha Sink Setter
- You no longer have to notch the top of the cabinets.
- There are plates that attach to the sides of the cabinets. This allows the bracket to be installed before or after the countertops.
- The new Sink Setter brackets allow you to replace a sink easily by lowering the leveling bolts to take the brackets out if the sink needs to be replaced.
- The new Sink Setter brackets allow you to re-set a sink in existing countertops.
- Includes two (2) heavy-duty Sink Setter bars – adjustable to 26” and all leveling bolts & screws.
