Shop
Showing 1441–1455 of 3245 results
-
Bridge Saw Blades by Diamax
Cyclone Ultra Blade
- Minimal upkeep; limited dressing
- Excellent finish for straight AND miter cuts
- Silent steel core for noise reduction and cutting efficiency
- Precision factory dressing and diamond bonding for minimal load while cutting
- Donatoni, Denver, & Breton pin holes standard
-
Bridge Saw Blades by Diamax
Cyclone Ultra Silent Core Blade (V2)
- New bond and diamond concentration make cuts fast and chip-free
- Designed for use on sintered stone and porcelain panels
- New reinforced core allows for stable miter cuts
- Comes in 14 and 16 inches diameter size
- 10mm Segment, with an Arbor of 50/60mm, maximum RPM 2,200 for the 14″ variation and 2,000 for the 16″ one
- For Wet Cut only
- These blades also can be used to cut Glass, Ultra-Compact, and Porcelain/Tile
-
Bridge Saw Blades by Diamax
Super Cyclone Porcelain Blade
- Category 5 Speeds!
- High-quality diamond for the sharpest edge on Dekton
- 15% thinner segment to create faster and cleaner cuts!
- Precision factory dressing so you never have to!
- Thin segment with reinforced core for perfect miter edges
- Donatoni, Denver, Breton pin holes standard on 16″ blade
-
Bridge Saw Blades by Diamax
Cyclone Low HP Silent Core Blade
Cyclone Low HP Silent Core Blade is specially designed for the Blue Ripper, Achilles TSA, or any portable track saw device, sporting Silent Core for Noise Reduction.
- First-ever low horsepower (LH) blade designed with a silent core
- Designed for the Achilles, Blue Ripper, TSA or any portable track saw device
- Special soft bond cuts super hard material with ease
CAN BE USED ON
MATERIALS
USE
Bridge Saw Engineered Stone, Granite, Quartzite Wet Only -
-
Bridge Saw Blades by Weha
Weha Grey Leopard Bridge Saw Blade
The Grey Leopard Bridge Saw Blade is a Split Segment Silent Core Diamond Bridge Saw Blade made to remove slurry fast, keep tons of water between the segments and stone, and cut fast and clean.
- The Grey Leopard Bridge Saw Blade is made to cut Quartzite, granite, engineered stone, and marbles.
- The Weha Grey Leopard is made with a specially designed stiff core that is much more rigid than standard silent core blades. This allows perfectly straight cuts on miters without the blade walking.
- The Grey Leopard will rank as one of the fastest and best diamond bridge saw blades.
-
-
Bridge Saw Blades by Weha
Weha White Lion Quartzite Bridge Saw Blade
- 60mm Arbor, 20mm Segment.
- The White Lion Bridge Saw blade bond was made specifically for cutting Quartzite stone. Granite and Engineered Stone will be cut at even a faster speed than other granite bridge saw blades.
- ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for as long of a life as possible when cutting Quartzite, granite, and engineered stone
- Depending on the Quartzite, Cutting speed with the White Lion Bridge Saw blade will be in the 5-10 ft per minute range for cutting Quartzite. It is always best to watch the amps on the saw to see the best cutting speed when cutting quartzite.
-
Bridge Saw Blades by Weha
Weha Matrix SJ SawJet Bridge Saw Blade
Weha Matrix SJ SawJet Bridge Saw Blade is a premium diagonal layered diamond blade designed to cut fast Quartzite, engineered stone, quartz materials. Also great on marbles.
- Because of the continuous layer of diagonal diamonds, the Weha Matrix SJ will last as long as 20-25mm height blades.
- This unique layered diamond is performing like no other blade on the market.
- Super quiet. Outstanding life.
-
Bridge Saw Blades by Weha
Weha Low Horse Power Bridge Saw Blade
- The Weha Low Horse Power Diamond Saw Blade has a total outside diameter of 13 ⅞”.
- This diameter allows it to fit on the Blue Ripper rail saw and inside other saws with a 14″ blade housing.
- This blade is excellent for the Achilli TSA 3 HP Portable Track Saw.
- 60mm arbor
- 10mm segment
-
-
Bridge Saw Blades by Weha
Weha Red Cat Bridge Saw Blade
- This silent core bridge saw blade is great for doing 45-degree miters as well with no deflecting.
- Red Cat is made to run steady tried and true cutting. If your saw has auto settings, set the saw to monitor amps and let it cut.
- The Red Cat is built with 15mm height tapered segments that are made to be an open cutting segment with plenty of water to keep it sharp and cutting clean and consistent.
- Red Cat will cut clean with very little chatter or chipping and will cut all the way to the core to get the maximum life out of the blade.
- The Red Cat blade is made for shops that want a good blade at the best price possible.
-
