Tenax Domo 10 A+B
Tenax Domo 10 A+B is a two-part knife-grade epoxy designed for all types of stone. It’s one of the strongest epoxies in the stone industry. It will bond to almost any surface including polished surfaces. This will bond to both damp and dry surfaces. Domo is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. White in color. Colors easily with Tenax Universal Colors. VOC compliant. This Domo 10 A+B Cartridge requires Tenax M200XMR Cartridge Gun for use.
You might also want to check the extensive line of Tenax Adhesives.
Instructions For Use
Make sure the surface to be treated is dry, clean, and free of dust. The mixing ratio of resin to catalyst is 1:1 (see chart below). Use clean tools. Stir vigorously and apply. Do not place unused products back in the can. Make sure the cans are sealed tightly after use. To clean tools we suggest light solvents like acetone and butyl acetate.
Demonstration Video
| Technical Data | |
|---|---|
| Viscosity Part A cps 77° | Thixotropic paste |
| Viscosity Part B cps 77° | Thixotropic paste |
| Density Part A/Part B at 77° gr/cm 3 | 1.3/1.3 |
| Aspect Part A/Aspect Part B | Ivory paste/white paste |
| Aspect Resin Hard | White |
| GARDNER color of the resin ASTM D1544 | NA |
| GARDNER color of the hardener ASTM D1544 | NA |
| Mixing ratio resin + hardener in weight | 100 + 100 = Total 200 |
| Gel time in bulk at 77° (100 gr resin + hardener) | Approximately 2h 30min |
| Tacky free in a thin layer at 77°; 50% relative humidity | Approximately 4 hours |
| Tacky free in a thin layer at 104°; 10% relative humidity | Approximately 3 hours |
| Hardness in Shore D (1) ASTM D 2240 | 81 |
| Glass transition temperature Tglass (ASTM E1545) (1) | 62 |
| Peeling test with glass fiber on marble (ASTM D3167) (1) | 1,5 N/mm |
| Adhesion force on marble (ASTM D4541)(1) | 15 Mpa |
| Adhesion force on glass (ASTM D4541)(1) | 15 Mpa |
| Weathering test on climatic chamber Qsun, (ASTM D904), 3 years of outdoor condition, light+rain+ thermal shock | Passed, no detachment of resin from the support |
| Yellowing test on the Xenon chamber 3 years (ISO11341) | Very high |
| Minimum reaction temperature | 41° |
| Minimum temperature of use after hardening | 77° |
| Maximum temperature of use after hardening | 140° |
| Working time at 77° (time for polishing or cutting) | 24 hours |
Shelf Life
Keep the can closed after use. This product will last at least 2 years under normal conditions between 65° and 77°. Keep away from heat, humidity, and sunlight.
Safety
Please read safety data sheet A and safety data sheet B before use and follow the product instructions
Domo A 10 Safety Data Sheet
Safety Data Sheet:
There are no reviews yet.