Tenax Tefill Chip Repair Kit
Tenax Tefill Chip Repair Kit is a dual viscosity stone repair kit. Tefill dries in under a minute and leaves a polished finish on the stone. Make use of it 1 for fissures, scratches, or chips on horizontal surfaces. Use it 2 to repair larger chips on both horizontal and vertical surfaces. Use it 3 Activator to create the chemical reaction.
How to Use
- Choose the TeFill Cyanoacrylate viscosity that is best for your application.
- Slightly overfill the damaged area with Tenax Tefill Chip Repair
- Spray TeFill 3 Activator and let it cure. It will take less than a minute. If not fully cured,
- spray TeFill 3 again and let it cure.
- Scrap the excess Tefill off with a razor blade.
- Buff lightly if necessary for a polished finish.
- Store in a safe place. Keep all containers closed when not in use. Store in temperatures
less than 75 degrees.
Warning
: Test first on white or light-colored stones for discoloration. On certain light or white stones, it is possible it will turn a dark color. Please test first
You might also want to check the extensive line of Tenax Adhesives.
Disclaimer:
the information contained is for general use and recommendations only. The information provided is based on our best knowledge at the time of the issue. The info contained within is believed to be accurate and is given in good faith. However, no warranty is made, either express or implied, regarding its accuracy or any liability arising out of the use of the information herein or the product supplied. When used in other preparations, formulations, or in mixtures, it is necessary to ascertain whether the classifications of the hazards have changed or how the product will be affected. The attention of the user is drawn to the possibility of creating other hazards when the product is used for a purpose other than that for which it was recommended.
Reviews
There are no reviews yet.