Shop
Showing 733–744 of 3311 results
-
Carts and Dollies by Groves Incorporated
GROVES Drywall Cart
- Gray powder coat finish.
- Heavy duty 8″ casters (Three swivel and one swivel with brake).
- Ships knocked down for freight savings.
- Material can be secured to the cart using hold-down straps (not included).
- Maximum total weight capacity is 2,000 lbs.
-
A Frames and Racks by Groves Incorporated
GROVES Fabrication Stand
- Heavy-duty powder-coated finish.
- Height adjustable from 36″ to 42″.
- Collapsable for easy transport and storage.
- Rubber-mounted on top prevents sliding and scratches.
- Maximum weight capacity 500 lbs. with top bar fully retracted / 300 lbs. top bar fully extended.
-
Carts and Dollies by Groves Incorporated
GROVES Glass Carts
- Heavy-duty powder-coated finish for long-lasting durability
- Carts have plywood bases and rubber mounted horizontally on the upright supports
- Available in 48, 60, 72, or 78-inch Load Heights
- Includes two rigid and two swivels with brake casters (caster kit optional for GLC‑4878)
- Hold-down straps must be used at all times.
-
Work Tables by Groves Incorporated
GROVES Glass Cutting Table
- Gray powder coat finish.
- Plywood will be mounted to the top and bottom shelf.
- The shelf height is 16″ from the floor.
- Ships are knocked down for freight savings and can be assembled in 20 minutes.
- Two rigid and two swivel brake 5″ casters.
-
-
Transport Frames by Groves
GROVES Glass Shoes
GROVES Glass Shoes are an essential accessory for safely and securely transporting glass packs quickly and efficiently. These shoes are meticulously designed with neoprene rubber lining and end ledges to provide optimal protection for the glass, preventing contact with the raw surface and minimizing the risk of damage during transport.
- Shoes are lined with neoprene rubber and have end ledges that prevent the sling from contacting the raw glass.
- Shoes are placed with a quick-release pin for easy mounting and removal. The stopper prevents the shoe from falling off.
- Shoe widths for glass packs 4¾”, 6¾”, 8½”, 10¼”, 13½”.
-
Stone Lifters by Groves Incorporated, Stone Lifters
GROVES Glass Slings
- Made with 3″ wide polyester webbing and includes side straps to help achieve a balanced load.
- The inside of slings and horizontal straps are covered with reinforced PVC-coated material to help prevent cutting.
- Velcro straps prevent slings from shifting on the beam when not under load.
- Check slings for wear and damage before each use.
- Workloads are rated at 9,600 lbs. per pair in a vertical lift.
- Slings should always be nested in the same corresponding sling stop on top of the beams.
- Always use included pins to secure the sling inside sling stops.
-
A Frames and Racks by Groves Incorporated
GROVES Harp Rack
- Gray powder-coated finish.
- It uses low-friction, high-density Polyethylene on the floor for easy glass sliding and provides a non-stick surface for insulated glass.
- The bottom surface is un-grooved for maximum rod spacing flexibility.
- The Load Height is 60″, and the Load Depth is 45″ (this allows for the proper operation of foot locks).
- Ships knocked down for freight savings.
- Includes four non-marking swivel casters rated at 1000 lbs. capacity each
- Two-foot locks are mounted in the front for stability.
-
Transport Frames by Groves
GROVES Heavy Duty Backsplash Cart
- Gray powder coat finish.
- The pull handle is mounted on one end for maneuverability.
- Ships knocked down for freight savings.
- Shelf dimensions are 77.5″ long x 10″ deep
- Two rigid and two swivel brake 5″ casters.
- Max Weight Capacity 3,200 lbs, when evenly distributed (300 lbs. max each for four upper suspended shelves, 1,000 max each for two bottom shelves).
-
Transport Frames by Groves
GROVES Heavy Duty Transport Rack
- A-Frame is forkliftable from both ends.
- Uprights and hold-down bars are designed in line with each other and have full-length protective rubber tubing for an even and secure contact.
- Rubber pads on the bottom supports are covered with a thick, braided nylon jacket for extra protection.
- Two bottom supports for every upright give extra support and protection for cutouts and other areas of weakness.
- The six-wheel design of the optional cart provides safe & efficient movement throughout the warehouse.
- Mounting the A-Frame onto a cart requires no fasteners; set it down on self-centering angled flanges.
- The Splash Caddie inside of the A-Frame allows for extra storage.
- Maximum weight capacity 6,000 lbs.
-
A Frames and Racks by Groves Incorporated
GROVES Mini Harp Rack
- Gray powder-coated finish.
- It uses low-friction, high-density Polyethylene on the floor for easy glass sliding and provides a non-stick surface for insulated glass.
- The bottom surface is un-grooved for maximum rod spacing flexibility.
- The Load Height is 60″, and the Load Depth is 45″ (this allows for the proper operation of foot locks).
- Ships knocked down for freight savings.
- Includes four non-marking swivel casters rated at 1000 lbs. capacity each
