Milwaukee M18 Fuel 9 in Cut-Off Saw

Milwaukee M18 Fuel 9 in Cut-Off Saw

Milwaukee M18 Fuel 9 in Cut-Off Saw delivers cordless, high-performance cutting capacity engineered to slice through reinforced concrete, masonry, and heavy structural metals without gas-engine headaches. Powered by the M18™ REDLITHIUM™ battery platform, this tool eliminates fuel-oil mixing, carburetor maintenance, pull-starts, and hazardous carbon monoxide exhaust, allowing safe indoor and enclosed trench operation. At only 10.6 lbs (bare tool), it is up to 50% lighter than traditional gas-powered demolition saws, drastically reducing operator fatigue on overhead, vertical, and all-day flatwork cutting jobs.

Engineered with a POWERSTATE™ brushless motor delivering 6,600 RPM, it provides a full 3.4-inch cutting depth utilizing a standard 9-inch blade with a 7/8-inch arbor. The saw features an integrated onboard quick-connect water connection for OSHA Table 1-compliant wet cutting when paired with portable water supplies like the M18™ SWITCH TANK™. Integrated jobsite safety and control features include a RAPIDSTOP™ blade brake to halt spinning within seconds, a real-time load indicator light to optimize cutting speed without bogging down, a fully adjustable guard, and ONE-KEY™ wireless tracking, inventory security, and tool management.

Main Features

• Reinforced Concrete Power: High-torque motor technology matches gas power to cut rebar-reinforced concrete, stone, brick, pipe, and ductile iron.
• Zero Gas Hassles: Instant push-button startup with no fuel mixing, spark plugs, or air filters, plus zero emissions for safe indoor use.
• Up to 50% Lighter Weight: Weighs just 10.6 lbs bare tool, significantly improving balance, maneuverability, and ergonomics over gas saws.3.4 in.
• Cutting Depth: Plunges deep enough to step-cut standard brick, 3-inch pipe, and slab joints in a single controlled pass.
• Onboard Quick-Connect Water Delivery: Integrated dual-sided water feed suppresses crystalline silica dust to maintain OSHA Table 1 compliance.
• RAPIDSTOP™ Electronic Brake: Stops blade rotation within seconds after you release the trigger for enhanced operator protection.
• ONE-KEY™ Integrated Tracking: Allows wireless Bluetooth inventory tracking, tool geofencing, and remote lockout through smartphone apps.
• Load Indicator Light: Real-time visual LED feedback guides users to maintain optimal cutting feed rate and maximize motor efficiency.

Specifications

Safety Guidelines

• Always engage the onboard water quick-connect with a pressurized water supply (such as the M18™ SWITCH TANK™) during concrete cutting to comply with OSHA respirable crystalline silica standards.
• Ensure replacement diamond or abrasive wheels are rated for 9-inch diameter, 7/8-inch arbor, and a minimum speed rating of 6,600 RPM or higher.
• Monitor the onboard load indicator LED: adjust manual feed pressure to keep the indicator green for maximum battery runtime and motor longevity.
• Use the onboard screwdriver and hex key stored directly in the tool handle to secure the blade flange nut and reposition the blade guard before operation.