Milwaukee
Showing all 8 results
- Diamond Blades, Diamond Abrasives
Milwaukee 14 in Ductile Iron Diamond Blade
- Industrial-grade diamond blade engineered for cutting ductile iron pipe, cast iron, water mains, sewer lines, and heavy ferrous utility lines.
- Shallow turbo segment design delivers fast cutting speeds, consistent cutting depth, and extended blade life.
- Electroplated diamond side coating helps prevent blade binding and pinching, reduces sidewall friction, and produces clean, low-burr edges.
- Laser-welded diamond segments provide a high-strength bond to the steel core for durability under demanding cutting conditions.
- The universal 1-inch arbor with a 20 mm adapter bushing fits high-speed gas cut-off saws, electric cut-off saws, and brick saws.
- Rated for a maximum operating speed of 5,460 RPM.
- Suitable for both wet and dry cutting applications.
- Angle Grinder Accessories, Machines & Power Tools
Milwaukee 6 in Green Concrete Diamond Blades
- 6-inch diamond blades designed for early-entry expansion and cutting control joints in fresh, uncured green concrete.
- Innovative U-notch segment design delivers up to 30% faster cutting than standard blades while reducing drag.
- Optimized for the Milwaukee® MX FUEL™ 6″ Green Concrete Saw (MXF316-2XC) and compatible with standard 6-inch early-entry saws featuring a triangular arbor.
- Designed exclusively for dry cutting, eliminating the need for water hookups, slurry collection, or washing equipment.
- 6-inch diameter with a 0.100-inch kerf thickness for early-entry concrete joint cutting.
- Available in Green, Red, Orange, and Yellow to match different aggregate hardness ratings.
- Angle Grinder Accessories, Machines & Power Tools
Milwaukee 9 in Universal Diamond Blade
- Delivers up to 5X longer life in cured concrete compared to standard economy diamond blades.
- Uniform diamond distribution keeps sharp cutting edges consistently exposed for fast, smooth, chatter-free cutting.
- Vented steel core dissipates heat during extended dry cutting, reducing overheating, core warping, and tension loss.
- Suitable for both wet and dry cutting applications.
- Maximum rated speed of 6,790 RPM for demanding jobsite cutting operations.
- Extended blade life helps reduce replacement frequency and jobsite downtime.
- Diamond Blades, Diamond Abrasives
Milwaukee Diamond Ultra Segmented Blades
- High-performance segmented diamond blades engineered for fast, efficient cutting of demanding concrete and masonry materials.
- Provides up to 75% longer runtime per battery charge when used with compatible cordless equipment.
- Vented steel core dissipates heat during sustained dry cutting, helping prevent core warping and tension loss.
- Universal 1-inch arbor with a 20 mm reducer bushing for versatile saw compatibility.
- Suitable for both wet and dry cutting applications.
- Cuts reinforced concrete, natural stone, concrete pavers, brick, concrete block, and roof tile.
- Available in 12-inch and 14-inch diameters to suit different cutting requirements.
- Power Tools, Surface Preparation, Tools & Supplies
Milwaukee M18 Fuel 9 in Cut-Off Saw
- POWERSTATE™ brushless motor delivers 6,600 RPM and a cutting depth of up to 3.4 inches with a standard 9-inch blade.
- Push-button startup eliminates fuel mixing, pull-starts, spark plugs, air filters, and gas-engine maintenance.
- Zero exhaust emissions enable safer operation in indoor and enclosed trench environments.
- RAPIDSTOP™ electronic blade brake stops blade rotation within seconds after trigger release for enhanced operator protection.
- ONE-KEY™ wireless technology enables Bluetooth tool tracking, geofencing, inventory management, and remote tool lockout.
- The fully adjustable blade guard improves cutting control and adaptability across applications.
- Designed to cut rebar-reinforced concrete, stone, brick, pipe, and ductile iron.
- Diamond Blades, Diamond Abrasives
Milwaukee Open-Lok Grout Removal Blade
- DIAMOND MAX™ diamond grit technology delivers up to 15X longer service life than standard carbide grit blades, with superior resistance to frictional heat and premature fracturing.
- Designed for removing damaged grout, mortar, and adhesive beds, including epoxy, polymer-modified, and sanded grouts.
- Curved cutting edge provides controlled plunge cuts and faster material evacuation for efficient grout removal.
- Reinforced Universal Fit OPEN-LOK™ anchor provides rigid torque transfer, reduced vibration, and compatibility with 100+ oscillating multi-tools.
- Compatible with non-Starlock oscillating multi-tools; not compatible with Starlock systems.
- Angle Grinder Accessories, Machines & Power Tools
Milwaukee Universal Grinding Dust Shrouds
- Compatible with most professional angle grinder brands, reducing the need for proprietary dust shroud systems.
- The quick “attach, tighten, and go” clamping system enables fast, convenient installation on compatible grinder collars.
- Clear front clip provides visibility of the working edge for precise control around edges, corners, and joints.
- Durable, lightweight construction designed for demanding professional applications.
- Available in 4–5-inch (49-40-6100) and 7-inch (49-40-6105) configurations to accommodate different grinding applications.
- Confirm grinder, vacuum, and shroud size compatibility before use.
- Angle Grinder Accessories, Machines & Power Tools
Milwaukee Universal Segmented Turbo Blades
- Suitable for cured concrete, reinforced masonry, natural stone, brick, block, and pavers.
- Designed for wet and dry cutting applications, providing versatility across different jobsite conditions.
- Multi-arbor compatibility includes 7/8-inch, 20 mm, diamond knockout (DM), and 5/8-inch spindle configurations.
- Compatible with standard small- and large-angle grinders and 4-inch and 7-inch circular saws when tool and arbor specifications match.
- Available in 4-inch and 7-inch diameters; verify blade size, arbor compatibility, and tool specifications before use.
