One Man Polymer Pump

$6,750.00

US Saws’ new and innovative design of the polymer pump allows one person to control the position of the pump with one hand while dispensing the joint filler with the other. Left and right-handed operation is easy with the double-sided “T” handle.

SKU: 162009 Category: Tag:

One Man Polymer Pump

US Saws’ new and innovative design of the polymer pump allows one person to control the position of the pump with one hand while dispensing the joint filler with the other. Left and right-handed operation is easy with the double-sided “T” handle. This “One Man Pump” allows other workers to handle different tasks while one person fills the joints. The new design also makes it easier for the pump operator as he knows exactly where the pump should be and where it needs to go next. No more running over wet floor joints. The strapped-on waste bucket makes those little drips on the floor a thing of the past. The operator holds the mixing tip over the bucket while transporting the pump to get set up for his next run. The storage space will fully accommodate a Honda EU1000i generator, deep-cycle battery, and inverter for cord-free operation. The 6.5-gallon tanks allow for a full 5-gallon bucket of joint filler to be loaded with room to spare. The semi-transparent polyethylene tanks will enable the operator to monitor fluid levels on the fly. They are easy to clean and inexpensive to replace. A new “spill cover” protects the motor and floor from dripped or spilled materials. No more wiping up spots on the floor of uncured resin with acetone and rags. The “One Man Pump” is a new, more efficient way to utilize labor while filling joints on large and small projects.

Polymer Pump Main Features

  • The New Design of this joint fill pump allows for one-person operation
  • The unit comes standard with a 1:1 component ratio, but a 2:1 component ratio is available
  • Lower tanks make filling easier
  • Dedicated storage area for generator or battery
  • Waste bucket holder for less drips on the floor
  • Enclosed box for tools storage
  • Use a deep cycle battery and 2,000-watt inverter or small generator for cord-free operation.
  • The generator shown in the pictures is not included.

Specifications Polymer Pump

FeatureValue
ModelPolyethylene Tanks
Part NumberSX20500
Power Source1/2 HP Electric Motor
Power Requirements110V, 60 Hz
Other Power OptionsGas Generator or Deep Cycle Marine Battery with Power Inverter
FrameSteel
Tanks6.5 Gallon Polyethylene
ManifoldRe-buildable, One-Piece, Aluminum Dispensing Manifold
Compatible MaterialsPolyurea and Epoxy Joint Fillers
Weight140 lbs
Dimensions51.18 × 25.59 × 30 in
Brand

U.S. Saws

Reviews

There are no reviews yet.

Be the first to review “One Man Polymer Pump”