Shop
Showing 2545–2556 of 3246 results
-
Cup Wheels & Drum Wheels, Resin Filled Cup Wheels, Turbo Cup Wheels by Diamax
Cyclone Hex Flat Resin Cup Wheel
Cup Wheels & Drum Wheels, Resin Filled Cup Wheels, Turbo Cup Wheels by DiamaxCyclone Hex Flat Resin Cup Wheel
- Increased resin surface gives a smooth feel when grinding
- More aggressive than the Cyclone Flat Resin Cup Wheel
- A flat 90° surface allows for corner shaping and grinding
- Provides a safer alternative to silicone carbide wheels
- Available in Coarse, Medium, and Fine Grits
- ⅝” – 11 thread [M18x2]
-
Core Bits and Finger Bits for CNC Machines
Weha RockPecker CNC Core Bits
- The RockPecker CNC core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other CNC machines.
- RockPecker CNC core bits have been built to core perfectly smooth, chip-free holes on all thickness materials.
- RockPecker CNC core bits have only a 1mm thick rim. These thin wall core bits will drill very clean and fast through the quartzite, quartz, granite, marble, and all materials.
- The RockPecker CNC core bits will drill hundreds of holes.
- RockPecker CNC core bits is one of the best CNC core bits that you can put on your CNC machine
-
Cup Wheels & Drum Wheels, Resin Filled Cup Wheels, Turbo Cup Wheels by Diamax
Cyclone S Resin Cup Wheel
Cup Wheels & Drum Wheels, Resin Filled Cup Wheels, Turbo Cup Wheels by DiamaxCyclone S Resin Cup Wheel
- 30/50 grit are aggressive enough for rapid stock removal with minimal effort
- 100/200 grit works great for clean-up on seams or miters. They also perform very well on Ultra-compact materials.
- These wheels have the look and feel of a pad but have the performance and durability of a cup wheel
- The aluminum body makes this cup wheel light
- Use Wet or Dry
-
Core Bits and Finger Bits for CNC Machines
Oma Dekton CNC Finger Bit
The Finger Bit System has produced a CNC Finger Bit specifically for Dekton, Porcelain, Ceramic, Sintered Stone materials. Twin 8 segment design with ½ gas connection made for all CNC machines.
- Twin 8 segment design with ½ gas connection made for all CNC machines.
- Designed for 400′- 450′ of life.
- The 50mm (5cm) Dekton Finger bit is designed for 4cm and 5cm (40mm and 50mm) material only due to the placement of the water slots. If using on 20mm (2cm) or 30mm (3cm) material, please purchase the 20mm or 30mm OMA Dekton Finger Bit
-
-
Core Bits and Finger Bits for CNC Machines
Oma CNC Finger Bit Green
Oma CNC Finger Bit Green is a modified 8 segment CNC finger bit for quartzite, granite, marble, quartz, engineered stone. Is designed to run between 14-25″ per minute between 5,500-8000 rpm, depending on the stone being used.
- The life will be excellent, the wear will be even, and the bit will provide an all-around, well-performing finger bit on practically all stone that is run through the CNC.
- The estimated life of the OMA CNC Finger Bit is outstanding. Running a mixture of quartz, granite, quartzite, marble, etc, you can expect between 100-130 sink cutouts when run at the below specifications.
- Typical life is between 550-750 Linear feet, with some bits lasting well over 1000 linear feet, depending on the rpm, feed rate, and materials
-
Core Bits and Finger Bits for CNC Machines
Weha Gas CNC Core Bit
The Gas CNC Core Bit is designed specifically to give unparalleled life, speed, and zero blowouts on CNC machines. Thin wall for fast, consistent drilling Total length: 4 ½” gas thread. Wet use only.
- Total length: 4″
- ½” gas thread
- Wet use only
-
Special Cup Wheels, Cup Wheels & Drum Wheels, Turbo Cup Wheels by Diamax
Cyclone Ultra Cup Wheel
- Fine diamond grit gives you chip-free grinding
- Fiber backing absorbs vibration to reduce chipping
- Great for prepping seam joints, miter clean up or beveled edge profiles
- Lightweight design allows for use on pneumatic polishers
- Available in Coarse, Medium, and Fine Grits
- Ideal for work with Engineered Stone, Granite, Marble, Porcelain/Tile, or Ultra-compact materials
- ⅝” – 11 thread [M18x2]
-
-
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha 2″ x 1 ⅝” Zero Tolerance Coarse Resin Filled
- The Zero Tolerance Coarse Resin Filled is so much safer than using the Silicon Carbide stones.
- The Zero Tolerance Coarse Resin Filled may be used wet or dry.
- Excellent for granite, marble, engineered stone.
- Has a Center water feed.
- Wet or Dry use.
- Max RPM: 10,000.
