Shop
Showing 2509–2520 of 3246 results
-
-
Adhesives, Chemicals
Chemorset A and B
- Two-component epoxy gel setting at ambient temperature. High modulus of elasticity.
- Moisture insensitive.
- Used on stone in the monument industry.
- Presentation: 2 components Part A & B
- Color: amber translucent
- Consistency (mix): buttery gel.
- Pot life of mix A/B: approximately 30 minutes
-
Anchoring and More, Chemicals Accessories
Closed Bottom Anchors 10-24 & Screws
Closed Bottom Anchors 10-24 & Screws are used for the Installation process and are very useful for Anchoring. Screw sizes: 1/2″ and 3/4″ long.
- Screw available sizes: 1/2″ and 3/4″ long 100 units per box
- Sold in Pack of 100 units
-
Sealers & Impregnators by Bellinzoni, Akemi and Others
CRISTADUR Crystallizer Extra Hard 5L
- Terrazzo, limestone and marble crystallizer specially formulated for the vitrifying and maintenance of all type of surfaces that contain calcium carbonate.
- Its exclusive formula allows for a quick aplication, providing the pavement with the waterproofing needed to keep a long lasting shine.
-
Wet Polishers By Diamax
Cyclone 3-Step Quartz Wet Polishing Pads
- For Wet use only
- 2,000-5,000 RPM (Recommended at 4,000)
- New Step 0 to remove deep scratches
- Super diamond concentration removes four polishing steps
- For use on Quartz or Engineered Stone
- The extremely flexible design allows for use on Ogee profiles & other tight corners
-
-
Router Bits, Router Bits By Diamax
Cyclone Bevel Router Bits
- The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
- Double-breaker bits for full-bull nose prep 3mm diamond depth
- 50% more diamond surface than the industry standard
- Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
- 8,000 Max RPM
- Special shapes, sizes, and grits available upon request
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Calibrating Wheel
- CNC Calibration Wheels prepare the slab by gauging or reducing the thickness
- This tool gives you a consistent edge
- For use on Engineered Stone or Granite
- Approximate Recommended Feed Rate is 35-70 inches per minute (IPM)
- For Wet use only
- 4″ diameter size
- Choose between 25 or 32 segments
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Z Wheel
- Available in both 60 mm and 80 mm
- Ultra-aggressive design for fast work at minimal spindle feed
- Extends the life of the first position on your profile bit sequence
- Ideal for Engineered Stone and Granite
- For Wet use only
- The 60mm variation has 15 segments, while the 80mm one has 21 segments
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Core Bits
- T-segment design with new diamond technology increases life and minimizes segment loss
- Designed with slot-openings on each side which prevents blow-outs
- Half-gas threading for CNC machine use
- Feed Rate: 30mm slab/2 IPM
- Ideal for working with Engineered Stone and Granite
- For Wet use only
- 2,300 Maximum RPM
-
Core & Non-Core Bits By Diamax, Core Drill Bits, Dry and Wet Core bits for Granite, Marble Core bits
Cyclone Ultra Core Bit
Core & Non-Core Bits By Diamax, Core Drill Bits, Dry and Wet Core bits for Granite, Marble Core bitsCyclone Ultra Core Bit
- Specific grit & bond composition provides a fast clean hole through porcelain & another ultra-compact material
- Featuring thin beveled segments for ease of entry into the material
- Shortened overall length for added control
- Wet or dry use
- Equipped with a user-friendly 5/8″ thread that allows drilling holes whether you are at the Shop or in the field at a job site
- 5,000 maximum RPM
