Tenax Quartz Color Match
Tenax Quartz Color Match knife grade glue is a high-quality polyester mastic adhesive used to vertically and horizontally repair, rebuild, glue, and fill quartz stone as well as granites and marbles. Quartz Color Match knife grade will cure shiny and is polishable.
Quartz Color Match is recommended for interior use and not suitable for temperatures below 32°.
To find out the correct color choice: Review the Color Chart for each brand of quartz material.
You might also want to check the extensive line of Tenax Adhesives.
Instructions for Use
Ensure that the surface to be treated is dry, clean, and free of dust. Mix glue and catalyst according to technical data below and stir thoroughly. Do not put glue back in the can after it has been mixed.
Technical Information for Tenax Quartz Color Match
|Viscosity cps 77° 20 r.p.m.(ASTM D2196)||300000-400000 cps|
|Density at 77° gr/cm3||1.65|
|The ratio of use glue/hardener||100+2/3|
|Gel time (in bulk) at 77° in min||4-5 min|
|Tacky free in a thin layer at 77° in min||15-20 min|
|Working time suggested at 77° in min||60-80|
|Minimum reaction temperature||32°|
|Minimum temperature of use after hardening||32°|
|Maximum temperature of use after hardening||+230°|
|Shelf life at 77°||6 months|
|Tensile Test ASTM D638|
|Ultimate tensile stress MPa||50|
|Flexion Test ASTM D790|
|Breaking Load MPa||110|
|Tensile Test ASTM D 4541|
|Adhesion force at 77° on the polished engineered stone after 2 hours||3.1|
|Adhesion force at 77° on the polished engineered stone after 24 hours||3.9|
|Adhesion force at 77° on the rough engineered stone after 2 hours||7.4|
|Adhesion force at 77° on the rough engineered stone after 24 hours||8.3|
Keep the parts used can be closed after use. This product will last at least 6 months under normal conditions between 65° and 77°. Keep away from heat, humidity, and sunlight.
Please read the safety data sheet before use and follow the product instructions