Shop
Showing 2653–2664 of 3311 results
-
Core Bits & Non-core Bits by Weha
Weha Dry Magic Core Bit ⅝-11 Thread
- Weha Dry Magic drills cleanly dry with zero chippings.
- The Weha Dry Magic is made to run between 3,000-11,000 rpm in all types of ceramic, porcelain, marble, granite.
- The vacuum brazing is on both the inside and outside of the barrel, as well two 2½” vacuum brazing up the outside barrel for full drilling depth.
- Virtually no chipping, minimal blowout on the bottom, fast drilling, and great life.
- This special Vacuum II Brazed diamond technology allows an uncomplicated, hands-free, and clean drilling on angle grinders. The Vacuum diamond coating allows fast drilling with extremely clean, chip-free holes.
- Weha Dry Magic Core Bit ⅝-11 Thread allows a drilling depth of 2½” (60mm) with a total length of 3½” (90mm).
-
Core Bits & Non-core Bits by Weha
Weha Dry Magic Core Bit Hex Shaft
The Dry Magic Core Bit Hex Shaft is made to drill in ceramic, porcelain, granite, marble, quartz, and all-natural and engineered stones.
- The Dry Magic Core Bit Hex Shaft can all be used wet
- The Dry Magic Core Bit Hex Shaft will leave ceramic, porcelain, granite, marble, and all stone with a clean, chip-free hole without any chips or blowouts around the hole.
- The Dry Magic Core Bit Hex Shaft will drill a hole without leaving a core. This is really important when only drilling into the material without going all the way through. This is great for setting anchors, clips, screws, etc with polyesters and epoxy glues.
-
Core Bits and Finger Bits for CNC Machines
Weha Top Racer High-Speed CNC Finger Bit
- The Weha Top Racer High-Speed Finger Bit is unbelievable on Granite, marble, and especially Engineered Stone, Quartz materials.
- The Faster you run the Top Racer, the better it performs!
- The Weha Top Racer high-speed CNC diamond finger bit is the fastest cutting CNC Finger Bit on the market! Designed for production work, the Top Racer can run up to 36″ per minute fully engaged!
- With its 8 segment design, the Top Racer Finger bit will remove material at an incredibly fast rate.
-
Stone Fabrication Accessories
Cyclone Flush Mount Adaptors
- Recommended use: All blades with four holes around the arbor
- ⅝”-11 thread [M18x2]
- Has ⅝”-11 thread female thread
- Quick Change Flush Mount Adapter for Diamond Blades
- This flush mount adapter is for Flush Cutting with Diamond Blades using Angle Grinders
- It can be used with Angle grinders, Pneumatic machines
- Can be used for Wet or Dry jobs
-
Router Bits By Diamax
Cyclone Full Bullnose Router Bits
- The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
- Double-breaker bits for full-bull nose prep 3mm diamond depth
- 50% more diamond surface than the industry standard
- Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
- 8,000 Max RPM
- Special shapes, sizes, and grits available upon request
-
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone Straight Edge Wheels White Resin
The Cyclone Straight Edge Wheels White Resin are specially designed to be used on white and light-colored materials without bleeding.
- Designed to be used on white and light-colored materials without bleeding
- Gives an exceptional and superior smooth finish in comparison to epoxy wheels
- 4″ Diameter Size
CAN BE USED ON
MATERIALS
USE
Auto Edge Machine Engineered Stone, Granite, Marble Wet Only -
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone Snail Lock System
- Fits most auto-edge profile machines with a new formula which ensures even wear and longer life
- Best for bull-nose shaping & polishing
- Copper bonded position #3 ensures longer life compared to standard resin
- For RPM please consult your machine technical specs
-
