Shop
Showing 2593–2604 of 3311 results
-
Core & Non-Core Bits By Diamax
Cyclone Non-Core Bit
- New dry segment matrix allows these non-core drill bits to perform under high heat conditions
- For best performance use at 6,500 RPM with center-fed water
- Best on Engineered Stone, Granite, Porcelain/Tile, or Ultra-Compact
- Specially designed for opening smalls holes to put anchors, pass screws into the Stone, cables, or specialty works
- 5/8″-11 thread
- Use Wet or Dry
-
Special Cup Wheels
Cyclone Cluster Puck
- Aggressive segment design for fast adhesive removal while leaving a tight scratch pattern
- Only 1 step needed for grinding before transition/ceramic or resin pads
- Multiple points create fast cutting to increase your pace and get the job done!
- Specially designed segments to cut through adhesive without clogging
- Universal backing to fit the most popular concrete grinders
-
Cup Wheels & Drum Wheels, Special Cup Wheels, Turbo Cup Wheels by Diamax
Cyclone Diamond Cluster Grinding Wheel
Cup Wheels & Drum Wheels, Special Cup Wheels, Turbo Cup Wheels by DiamaxCyclone Diamond Cluster Grinding Wheel
- Diamond cluster points rip away epoxy and fiberglass backing
- Flat tip leaves a smooth finish for easy surface preparation
- Great for removing resin polish to prepare the slab for honing
- New waterproof coating on all sizes feature allows for use in wet grinding applications
- Can be used effectively for fast edge shaping applications
- Excellent lightweight wheel for air polishers
- Great for removing resin polish to prepare the slab for leathering or honing
-
Special Cup Wheels
Cyclone PCD Wheel
- Made from PCD (polycrystalline diamond), designed for aggressive removal of hard and tacky surfaces.
- Available on 5″ and 7″ diameter sizes
- Steel body
- Medium 50/60 Grit. PCD Wheels are more aggressive than regular Diamond Wheels, work very well on Epoxy, and Urethane, and old paint
-
Special Cup Wheels, Cup Wheels & Drum Wheels, Turbo Cup Wheels by Diamax
Super Cyclone Multi-Cutter Grinder
Special Cup Wheels, Cup Wheels & Drum Wheels, Turbo Cup Wheels by DiamaxSuper Cyclone Multi-Cutter Grinder
- Versatile shaping blade for trimming and grinding porcelain and softer, fragile materials
- Makes fast, clean, and aggressive cuts like a sharp blade
- Safer grinding alternative to regular sintered tile blades
- Will not break under pressure
- Flush mount adapter included
- Cuts clean miters
- Comes in one diameter only: 5″
-
Core & Non-Core Bits By Diamax, Marble Core bits
Cyclone Ultra Non-Core Bit
- Designed with a special bond for large format porcelain and ultra-compact material
- Best on Granite, Marble, Porcelain/Tile, or Ultra-Compact
- Specially designed for opening smalls holes to put anchors, pass screws into the Stone, cables, or specialty works
- 5/8″-11 thread
- Use Wet or Dry
-
Core & Non-Core Bits By Diamax
Cyclone Dry/Wet Side Protection Core Bit
- An upgrade from our regular T-segment. Diamond side protection on the outside and inside the shaft for ease of drilling and core release
- Perfect for use in the field when water is not an option
- Use with water to prolong the segment life
- 5/8″-11 thread [M18x2]
- Beyond being a versatile Core Bit, our customers have been using it for opening holes for installing reverse osmosis faucets on countertops
-
Wet Polishers, Wet Polishers By Diamax
Cyclone Engineered Stone Polishing Disks
These Engineered Stone Polishing Pads promise no staining of stone and deliver a brilliant, deep shine even on the most difficult of Engineered Stones.
- Designed to function exceptionally well on all types of engineered stone (Silestone, Zodiac, Cambria, etc.)
- When used properly with water these pads won’t bleed or burn the materials
- This pad system will get you a quicker, better result than using other Granite Polishing Pads on engineered stone
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Combo Finger Bit
- Faster incremental cutting with a larger bottom segment
- Up to 3/8″ stock removal per pass
- Overall, cutting time is shorter by 60%
- Fastest cutting finger bit for 5-axis saws
CAN BE USED ON
MATERIALS
USE
CNC Machine Engineered stone, granite Wet Only -
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Finger Bits
Cyclone Finger Bits bottom segment gives the CNC operator the option of drilling into the slab like a core bit. The 7 segment finger bit has the first-ever reverse apple core design.
- Available in 1 ⅝” and 2 ½” for different granite thickness
- The bottom segment gives the CNC operator the option of drilling into the slab like a core bit
- The 7 segment finger bit has the first-ever reverse apple core design – thicker in the middle
CAN BE USED ON
MATERIALS
USE
CNC Machine Engineered Stone, Granite, Marble Wet Only
