Cyclone Non-Core Bit
The Cyclone Non-Core Bit new dry segment matrix allows these non-core drill bits to perform under high heat conditions. It is specially designed for opening smalls holes to put anchors, pass screws into the Stone, cables, or specialty jobs. For best performance use at 6,500 RPM with center-fed water.
Cyclone is the premium line of Diamax products, a well-established company in the USA since 1996, which has gained them a superb reputation among the stone fabrication community, with a return ratio of less than 1%. You might also want to check our other Core Drill Bits.
Non-Core Bit Features
Among these Bit features, we find:
- New dry segment matrix allows these non-core drill bits to perform under high heat conditions
- For best performance use at 6,500 RPM with center-fed water
- Best on Engineered Stone, Granite, Porcelain/Tile, or Ultra-Compact
- Specially designed for opening smalls holes to put anchors, pass screws into the Stone, cables, or specialty works
- 5/8″-11 thread
- Use Wet or Dry
Watch the Cyclone Non-Core Bit in action
Cyclone Non-Core Bit Technical Specifications
| SKU | SIZE | FITTING | USABLE LENGTH | MAX RPM WET | MAX RPM DRY |
|---|---|---|---|---|---|
| CDBYNC316 | 3⁄16” | ⅝”-11 thread | 2″ | 6,500 | 2,000 |
| CDBYNC14 | ¼” | ⅝”-11 thread | 2″ | 6,500 | 2,000 |
| CDBYNC516 | 5⁄16” | ⅝”-11 thread | 2″ | 6,500 | 2,000 |
| CDBYNC38 | ⅜” | ⅝”-11 thread | 2″ | 6,500 | 6,000 |
| CDBY12 | ½” | ⅝”-11 thread | 2.75″ | 8,000 | 6,000 |
| CDBY58 | ⅝” | ⅝”-11 thread | 2.75″ | 8,000 | 6,000 |
| CDBY34 | ¾” | ⅝”-11 thread | 2.75″ | 8,000 | 6,000 |
Reviews
There are no reviews yet.