Weha Brand Page
Explore More Weha Products
Visit the full Weha collection and browse more related products.
Weha
Showing 166–180 of 313 results
-
Pneumatic Wet Tools Machines
Weha Blizzard Rear Exhaust Center Water Feed Air Polisher
- The Blizzard Granite Air polisher is a Rear Exhaust Air polisher that does not lose power during the granite and stone polishing process.
- The Blizzard Center Water Feed stone polisher comes with 2 hoses. 1 for air. 1 for water. Both feed on the back of the tool.
- The nice advantage of Rear Exhaust Air polishers is the fact that air is not blowing on the hands or the potential of blowing oil onto the surface of the stone and creating a stain.
- Still, very lightweight at only 3.5 lbs, the Weha Blizzard Rear Air Polisher is easy to handle and will not create user fatigue.
-
Pneumatic Wet Tools Machines
Weha High-Speed Water feeds Air Grinder & Cutter WH185
- The Weha WH185 can also be run without water as well.
- The Weha WH185 comes with a paddle trigger to have complete control over the air cutter at all times. Also, the WH185 has a solid handle to keep cutting and grinding easy with less fatigue.
- The WH185 Air Cutter is made to work with a 5″ blade to cut granite, marble, quartz, quartzite, stone materials.
- The great thing is that it uses less air than other air grinders. It only requires 9.8 CFM at 90 PSI.
-
Pneumatic Wet Tools Machines
Weha Speedy Side Exhaust Center Water Feed Air Polisher
- Comes with Wrench, side handle, water guard, air hose, and water hose.
- Side Exhaust.
- The Weha Speedy Water Feed Granite Air Polisher is made with upgraded premium bearings to run 24 hours a day.
- The great thing about the Weha Speedy Water Feed Air Polisher is that it runs off of 16cm. This means it will not slow down or lose power during the polishing process.
- At 5,000 RPM, the Weha Speedy granite Air Polisher is one of the fastest polishers on the market.
- With the weight at only 2.6 lbs, the fabricator can run this wet air polisher all day without having user fatigue.
-
Core Bits and Finger Bits for CNC Machines
Weha Weramic CNC Porcelain Ceramic Core Bits
- The Weramic CNC porcelain and ceramic core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other CNC machines.
- Weramic CNC porcelain core bits have been built to core perfectly smooth, chip-free holes on all thickness materials from 6mm, 8mm,10mm, 12mm 20mm, and 30mm.
- Weramic CNC porcelain and ceramic core bits have only a 2mm thick rim. These thin wall core bits will drill very clean and fast through the porcelain and ceramic materials.
- The Weramic CNC porcelain and ceramic core bit is one of the best Dekton, Lapitec, or Neolith CNC core bits that you can put on your CNC machine
-
Core Bits and Finger Bits for CNC Machines
Weha RockPecker CNC Core Bits
- The RockPecker CNC core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other CNC machines.
- RockPecker CNC core bits have been built to core perfectly smooth, chip-free holes on all thickness materials.
- RockPecker CNC core bits have only a 1mm thick rim. These thin wall core bits will drill very clean and fast through the quartzite, quartz, granite, marble, and all materials.
- The RockPecker CNC core bits will drill hundreds of holes.
- RockPecker CNC core bits is one of the best CNC core bits that you can put on your CNC machine
-
Core Bits and Finger Bits for CNC Machines
Weha Gas CNC Core Bit
The Gas CNC Core Bit is designed specifically to give unparalleled life, speed, and zero blowouts on CNC machines. Thin wall for fast, consistent drilling Total length: 4 ½” gas thread. Wet use only.
- Total length: 4″
- ½” gas thread
- Wet use only
-
-
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha 2″ x 1 ⅝” Zero Tolerance Coarse Resin Filled
- The Zero Tolerance Coarse Resin Filled is so much safer than using the Silicon Carbide stones.
- The Zero Tolerance Coarse Resin Filled may be used wet or dry.
- Excellent for granite, marble, engineered stone.
- Has a Center water feed.
- Wet or Dry use.
- Max RPM: 10,000.
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha Vacuum Brazed Zero Tolerance Wheel No Bearing
- Vacuum Brazed Zero Tolerance wheels offer virtually chip-free stock removal. This means you can remove stone all the way to the line without the worry of a blowout
- Because the Weha 1″ Zero Tolerance cutter is small in diameter, it reaches into those tight corners for very tight, smooth grinding
- Zero Tolerance wheels are much safer than using Silicon Carbide Cup wheels
- By not having a bearing on top, the Vacuum Brazed Zero Tolerance wheel is the best choice for use on by hand tool or with a radial arm with no template
- Max RPM: 4,000
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha Vacuum Brazed Zero Tolerance Wheel Top Bearing
- A great advantage of using Vacuum Brazed Zero Tolerance Cutters will not lose their shape, can be used dry or wet with the center water feed holes.
- Vacuum Brazed Zero Tolerance wheels offer virtually chip-free stock removal.
- Zero Tolerance wheels are much safer than using Silicon Carbide Cup wheels.
- By having a bearing on top, the Vacuum Brazed Zero Tolerance wheel is the best choice for use on radial arm machines, or if you want to work off of a wood or plastic template.
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha 3″ x 1 ⅝” Zero Tolerance Coarse Wheel Resin Filled
- The Zero Tolerance Coarse Wheel Resin Filled is so much safer than using the Silicon Carbide stones.
- The Zero Tolerance Coarse Wheel Resin Filled may be used wet or dry.
- Excellent for granite, marble, engineered stone.
- Has a Center water feed.
- Wet or Dry use.
- Max RPM: 10,000.
-
Cupwheels & Zero Tolerance Wheels by Weha
Weha 3″ x 1 ⅝” Zero Tolerance Medium Resin Filled
- The Zero Tolerance Medium Resin Filled is so much safer than using the Silicon Carbide stones.
- The Zero Tolerance Medium Resin Filled may be used wet or dry.
- Excellent for granite, marble, engineered stone.
- Has a Center water feed.
- Wet or Dry use.
- Max RPM: 10,000.
-
