Metzger McGuire products support concrete floor joint filling and repair. Compare the listed material types, package sizes and application requirements, and review manufacturer instructions for surface preparation, installation and curing conditions.
Metzger McGuire
Showing all 7 results
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Dual Cartridge Guns
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Dual Cartridge Guns
- Specialized dispensing guns for dual-cartridge joint fillers and repair products
- Tested and approved for optimal dispensing performance
- Designed to work with dual-component cartridges and product-specific static mixers
- Helps achieve an even, consistent chemical mix and cure
- Suitable for rapid-setting polyurea systems where hand mixing is impractical or impossible
- Different cartridge sizes may require different ratioed dispensing tools
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Edge-Pro 80 Polyurea Joint Filler
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Edge-Pro 80 Polyurea Joint Filler
- Two-part, 100% solids, rapid-setting polyurea polymer system
- Cures to a rubber-like solid with Shore A hardness of 80–81
- Fills and protects joints in exposed concrete retail and moderate-duty warehouse floors
- Protects joint edges from spalling caused by material-handling vehicle traffic
- Also suitable for filling random cracks
- Intended for operating temperatures from -20°F (-29°C) to +120°F (49°C)
- Superior substrate adhesion compared with similar polyurea joint fillers
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Rapid Refloor 600 ml
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Rapid Refloor 600 ml
- 100% solids, two-component structural polyurea/polyurethane hybrid
- Low-viscosity formulation for concrete repair applications
- Designed to repair random cracks, surface spalls/pop-outs, bolt holes, and other small surface defects
- Suitable for industrial, retail, and commercial concrete floors
- Intended for floors subject to wheeled traffic
- Fast-set chemistry for rapid return to service
- Ready for traffic in approximately 15–30 minutes
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Rapid Refloor 600 ml Static Mixer
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Rapid Refloor 600 ml Static Mixer
- Replacement static mixer for Metzger/McGuire Rapid Refloor 600 mL cartridge
- 24 mixing elements
- 10.7 mm square design
- Designed for cartridge-based dispensing
- Helps provide proper component mixing during application
- Replacement accessory for Rapid Refloor systems
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Spal-Pro 2000 450 ml
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Spal-Pro 2000 450 ml
- 100% solids, two-component heavy-duty semi-rigid polyurea
- Designed for concrete joint and crack repair
- Suitable for industrial and freezer/cooler concrete floors
- Works in temperatures as low as -30°F (-35°C)
- Return to service in 30 minutes or less
- Shore A hardness of 95–100
- Ideal for repairing spalled joints, random cracks, gouges, holes, and surface defects
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire Spal-Pro 2000 900 ml
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire Spal-Pro 2000 900 ml
- 100% solids, two-component, heavy-duty semi-rigid polyurea
- Designed for repairing concrete joints and cracks
- Suitable for industrial and freezer/cooler concrete floors
- Low-temperature applications down to -30°F (-35°C)
- Return to service in 30 minutes or less
- Shore A hardness of 95–100
- Repairs spalled joints, random cracks, gouges, holes, and other surface defects
- Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface Preparation
Metzger/McGuire SRG Surface Refinement Grout
Coating & Sealers/Adhesives & Coating Removers, Chemicals, Surface PreparationMetzger/McGuire SRG Surface Refinement Grout
- Two-component, 95% solids structural polyurethane/polyurea hybrid
- Cures into a rigid structural polymer
- Fills and repairs air holes, sand aggregate pops, surface pitting, scratches, gouges, and other micro-level concrete imperfections
- Suitable for commercial and retail polished concrete floors
- Designed for final building temperatures from 32°F (0°C) to 120°F (49°C)
- Can be mixed with sand aggregate or similar material to create a repair mortar for joints, cracks, and larger defects
- Designed for use with a color pack
