Tenax Jet Spray
Tenax Jet Spray is a liquid aerosol. Apply to a non-polished surface that was missed during fabrication or too hard to reach or polish. The varnish forms a film or coating on the surface that creates a polished look. Completely dry in 15 minutes. Cannot be walked on. Great for job site touch-ups.
You might also want to check the extensive line of Waxes & Polishers.
Directions
Make sure the surface to be treated is clean and completely dry. Spread a thin and uniform layer on the surface. Wait a few minutes until the surface is dry. We suggest you test this product on a small hidden area before use.
This product treats approximately 161-215 sq. ft. depending on the porosity of the surface.
Technical Information for Tenax Jet Spray
| Technical Data | |
|---|---|
| Density at 77° gr/ml | 1.3 |
| Aspect | Liquid |
| Standard Color | Transparent yellowish |
| Drying time | 5-10 mi at 77° |
| Tacky Free | 60 min at 77° |
| Thickness suggested in micron | 20-30 |
Shelf Life
This product will last at least 6 months if kept between 65° and 77°. Keep away from heat, humidity and sunlight.
There are no reviews yet.