Tenax Jet Spray
Tenax Jet Spray is a liquid aerosol. Apply to a non-polished surface that was missed during fabrication or too hard to reach or polish. The varnish forms a film or coating on the surface that creates a polished look. Completely dry in 15 minutes. Cannot be walked on. Great for job site touch-ups.
You might also want to check the extensive line of Waxes & Polishers.
Make sure the surface to be treated is clean and completely dry. Spread a thin and uniform layer on the surface. Wait a few minutes until the surface is dry. We suggest you test this product on a small hidden area before use.
This product treats approximately 161-215 sq. ft. depending on the porosity of the surface.
Technical Information for Tenax Jet Spray
|Density at 77° gr/ml||1.3|
|Standard Color||Transparent yellowish|
|Drying time||5-10 mi at 77°|
|Tacky Free||60 min at 77°|
|Thickness suggested in micron||20-30|
This product will last at least 6 months if kept between 65° and 77°. Keep away from heat, humidity and sunlight.