Tenax Eliox part A and B knife grade
Tenax Eliox is an extra clear bi-component epoxy knife grade glue approved for food contact. Suitable to fill, glue, and laminate marble, stone, granite, quartz, and ceramic. Can be used indoor and outdoor. This product is extra clear, soft and light, easy to spread, and with a high gloss and brightness.
- Excellent adhesion
- Very low shrinkage during the hardening processing
- Easy to color
- Soft and easy to apply
- Very bright and easy to polish
- Dripless and does not sag
- Resistant to temperature
- Indoor/Outdoor
- Extra strong
- Transparent
- Extra clear
- Very low yellowing
- Very easy dosing
- Food contact approved
You might also want to check the extensive line of Tenax Adhesives.
Demonstration Videos
Technical Information for Tenax Eliox Part A and B Knife Grade
| TECHNICAL DATA | |
|---|---|
| Viscosity part A cps 77° | Tixotropic paste |
| Viscosità part B cps 77° | Tixotropic paste |
| Density part A/part B at 77° gr/cm³ | 1.1 / 1.0 |
| Mixing Ratio hardener | 100+50 |
| Gel time in bulk at 77° | 10-15 min |
| Tacky free in a thin layer at 77° | Approx. 3h – 3h 30min |
| Hardeness in Shore D ASTM D 2240 | 80 |
| Yellowing test in climatic chamber Qsun,(ASTM D904), 1 year of outdoor conditions, light + rain+ thermal shock | Low |
| Minimum reaction temperature | +50° |
| Minimum temperature of use after hardening | -77° |
| Maximum temperature of use after hardening | +140° |
| Working time at 77° (time for polishing or cutting) | 24 hours |
| Adhesion on marble after 8h | 11 MPa |
| Adhesion on marble after 24h | 12 MPa |
| Adhesion on quartz after 8h | 13 MPa |
| Adhesion on quartz after 24h | 13 MPa |
| Adhesion on ceramic after 8h | 16 MPa |
| Adhesion on ceramic after 24h | 17 MPa |
Safety
Please read the safety data sheet before use and follow the product instructions.
There are no reviews yet.