Tenax Titanium Extra Strong Flowing
Tenax Titanium Extra Strong Flowing has been developed with the latest Vinyl Ester technology. Titanium is ideal for seaming, laminations, miter cuts, chip repair on all granite, marbles, quartz, and quartzite materials. Transparent with a slightly blue-purple color, It does not darken after cure. Titanium is superb on white and light-colored marble, quartz, and quartzite materials. Takes color very well for darker stones. Tenax Titanium is very fast and has very good workability.
Easy to stir and spread. Stays a flowing consistency even after adding the hardener. Has excellent adhesion in a short amount of time which enables the stone to be handled in a very fast time even at low temperatures. After curing Tenax Titanium has a flat surface with a high gloss and is very polishable. After the addition of the hardener, the glue will change color but will return to the original white color after a few minutes. This can be used as a catalyst indicator. Tenax Titanium contains a UV absorber. Exceptional strength for CNC and line machine use right after cure. Excellent for indoor applications and outdoor applications that stay above 32°
- Excellent adhesion in a short amount of time
- Superb on white and light material
- Very polishable
- Colors easily
You might also want to check the extensive line of Tenax Adhesives.
Instructions for use
Make sure the surface to be treated is dry, clean, and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. The mixing ratio of resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused products back in the can. Make sure the can is sealed tightly after use.
Technical Information for Tenax Titanium Extra Strong Flowing
| Technical Data | |
|---|---|
| Viscosity cps 77° 20 r.p.m.(ASTM D2196) | 1100-2100 cps |
| Density at 77° gr/cm 3 | 1.1 |
| Aspect | Transparent Liquid slightly blue-purple |
| The ratio of use glue/hardener | 100+2/3 |
| Gel time (in bulk) at 77 ° (25 °C) in min | 4-6 min |
| Tacky free in a thin layer at 77 ° (25 °C) in min | 18-20 min |
| Working time suggested at 77 ° (25 °C) in min | 20-25 min |
| Minimum reaction temperature | +41° |
| Minimum temperature of use after hardening | 32 ° (+5 °C) |
| Maximum temperature of use after hardening | 230 ° (+110 °C) |
| Shelf life at 77° | 10 months |
| Adhesion force at 77° marble botticino after 2 hours in Mpa ASTM D 4541 | 7.5 |
Shelf Life
Keep away from heat, humidity, and sun. The product will last at least 10 months if kept between 68°F – 77°F.
Safety
Please read the safety data sheet before using it.
There are no reviews yet.