Shop
Showing 616–630 of 3193 results
-
A Frames and Racks by Groves Incorporated
GROVES Fabrication Stand
- Heavy-duty powder-coated finish.
- Height adjustable from 36″ to 42″.
- Collapsable for easy transport and storage.
- Rubber-mounted on top prevents sliding and scratches.
- Maximum weight capacity 500 lbs. with top bar fully retracted / 300 lbs. top bar fully extended.
-
Carts and Dollies by Groves Incorporated
GROVES Glass Carts
- Heavy-duty powder-coated finish for long-lasting durability
- Carts have plywood bases and rubber mounted horizontally on the upright supports
- Available in 48, 60, 72, or 78-inch Load Heights
- Includes two rigid and two swivels with brake casters (caster kit optional for GLC‑4878)
- Hold-down straps must be used at all times.
-
Work Tables by Groves Incorporated
GROVES Glass Cutting Table
- Gray powder coat finish.
- Plywood will be mounted to the top and bottom shelf.
- The shelf height is 16″ from the floor.
- Ships are knocked down for freight savings and can be assembled in 20 minutes.
- Two rigid and two swivel brake 5″ casters.
-
-
Transport Frames by Groves
GROVES Glass Shoes
GROVES Glass Shoes are an essential accessory for safely and securely transporting glass packs quickly and efficiently. These shoes are meticulously designed with neoprene rubber lining and end ledges to provide optimal protection for the glass, preventing contact with the raw surface and minimizing the risk of damage during transport.
- Shoes are lined with neoprene rubber and have end ledges that prevent the sling from contacting the raw glass.
- Shoes are placed with a quick-release pin for easy mounting and removal. The stopper prevents the shoe from falling off.
- Shoe widths for glass packs 4¾”, 6¾”, 8½”, 10¼”, 13½”.
-
Stone Lifters by Groves Incorporated, Stone Lifters
GROVES Glass Slings
- Made with 3″ wide polyester webbing and includes side straps to help achieve a balanced load.
- The inside of slings and horizontal straps are covered with reinforced PVC-coated material to help prevent cutting.
- Velcro straps prevent slings from shifting on the beam when not under load.
- Check slings for wear and damage before each use.
- Workloads are rated at 9,600 lbs. per pair in a vertical lift.
- Slings should always be nested in the same corresponding sling stop on top of the beams.
- Always use included pins to secure the sling inside sling stops.
-
A Frames and Racks by Groves Incorporated
GROVES Harp Rack
- Gray powder-coated finish.
- It uses low-friction, high-density Polyethylene on the floor for easy glass sliding and provides a non-stick surface for insulated glass.
- The bottom surface is un-grooved for maximum rod spacing flexibility.
- The Load Height is 60″, and the Load Depth is 45″ (this allows for the proper operation of foot locks).
- Ships knocked down for freight savings.
- Includes four non-marking swivel casters rated at 1000 lbs. capacity each
- Two-foot locks are mounted in the front for stability.
-
Transport Frames by Groves
GROVES Heavy Duty Backsplash Cart
- Gray powder coat finish.
- The pull handle is mounted on one end for maneuverability.
- Ships knocked down for freight savings.
- Shelf dimensions are 77.5″ long x 10″ deep
- Two rigid and two swivel brake 5″ casters.
- Max Weight Capacity 3,200 lbs, when evenly distributed (300 lbs. max each for four upper suspended shelves, 1,000 max each for two bottom shelves).
-
Transport Frames by Groves
GROVES Heavy Duty Transport Rack
- A-Frame is forkliftable from both ends.
- Uprights and hold-down bars are designed in line with each other and have full-length protective rubber tubing for an even and secure contact.
- Rubber pads on the bottom supports are covered with a thick, braided nylon jacket for extra protection.
- Two bottom supports for every upright give extra support and protection for cutouts and other areas of weakness.
- The six-wheel design of the optional cart provides safe & efficient movement throughout the warehouse.
- Mounting the A-Frame onto a cart requires no fasteners; set it down on self-centering angled flanges.
- The Splash Caddie inside of the A-Frame allows for extra storage.
- Maximum weight capacity 6,000 lbs.
-
A Frames and Racks by Groves Incorporated
GROVES Mini Harp Rack
- Gray powder-coated finish.
- It uses low-friction, high-density Polyethylene on the floor for easy glass sliding and provides a non-stick surface for insulated glass.
- The bottom surface is un-grooved for maximum rod spacing flexibility.
- The Load Height is 60″, and the Load Depth is 45″ (this allows for the proper operation of foot locks).
- Ships knocked down for freight savings.
- Includes four non-marking swivel casters rated at 1000 lbs. capacity each
-
A Frames and Racks by Groves Incorporated
GROVES Multi-Purpose Glass Storage System
- Heavy-duty powder-coated finish
- Rails are designed with slots to hold 2 x 4’s, which protect the stored product and the finish on the rails (2 x 4s not included). Optional
- Easy Slide (made of low friction material) can be mounted to the 2 x 4’s for extra protection
- Center rail with easy slide must be used to support the glass when sliding individual lives in and out of the rack
- Outside rails are built with 2″ square holes spaced 4″ apart. A steel plate with identical holes is welded and boxed inside the rails, 1″ up from the bottom
- 2″ square tube posts and 2″ square rubber post caps to separate glass
- Complete with an 11″ connector tube for butting rails together in a straight line for the desired length
-
A Frames and Racks by Groves Incorporated
GROVES Outside Rail with optional Easy Slide
- Store loose liters, insulated glass, tempered glass, plastic sheets, shower doors, and more. The center rail with an easy slide must support the glass when sliding individual pieces in and out of the racks.
- Easy Slide, a low-friction material, is mounted to the rails and posts to facilitate product sliding in and out.
- Outside rails have 2″ square holes spaced 4″ apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1″ up from the bottom.
- Note: When assembled, the overall usable height of the post is 5.5″ less than listed. For example, a 60″ post will be 54.5″ above the top of the outside rail.
- Rails shipped with an 11″ connector tube for butting rails together in a straight line.
-
A Frames and Racks by Groves Incorporated
GROVES Post 102″
- Heavy-duty storage post designed for glass handling and industrial rack systems
- Supports up to 4,000 lbs between posts for demanding storage applications
- Durable powder-coated finish resists rust, scratches, wear, and corrosion
- 102″ length provides reliable structural support and material organization
- Suitable for glass, wood cases, and other stored materials
- Adjustable design allows quick installation and flexible rack configurations
- Built for long-term performance in warehouses, fabrication shops, and storage facilities
- Delivers exceptional strength, stability, and secure material storage
-
A Frames and Racks by Groves Incorporated
GROVES Post with Optional Easy Slide
- 60″- 102″ posts for storing smaller fabricated parts and cut-offs
- 2″ square tube posts are used to prevent scratches.
- Easy Slide, a low-friction material, is mounted to the rails and posts to facilitate product sliding in and out.
- Store wood case or loose lites up to 4,000 lbs. between posts (2,000 lb. capacity per post).
- Maximum weight capacity 4,000 lbs. (2,000 lbs. per post)
