Shop
Showing 2806–2820 of 3245 results
-
OMA Router Bits by Weha
Oma Bevel E20 Prodiam Cont Metal Pos 2
The Bevel E20 Prodiam Cont Metal Pos 2 are diamond brazed technology bits that work excellent on marble, limestone, travertine.
- Oma Bits are produced in Italy with OMA controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
-
OMA Router Bits by Weha
Oma Bevel E20 Extradiam Pos 3
- The Critical bit between the profile and polishing phase of the Oma system of bits.
- The first bit without a bearing to fully engage the stone in the polishing process.
- An optimum bit before starting the Oma polishing wheels or start with hand polishing.
- The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Bevel E20 Truelife
- The Bevel E20 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
- Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
- Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Bevel Replacement Segments
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
- Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
- Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
- Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
-
OMA Router Bits by Weha
Oma Full Bullnose V30 Prodiam Cont Metal Pos 2
The Full Bullnose V30 Prodiam Cont Metal Pos 2 is diamond brazed technology bits that work excellent on marble, limestone, travertine.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
-
OMA Router Bits by Weha
Oma Full Bullnose V30 Extradiam Pos 3
- The Critical bit between the profile and polishing phase of the Oma system of bits.
- The first bit without a bearing to fully engage the stone in the polishing process.
- An optimum bit before starting the Oma polishing wheels or start with hand polishing.
- The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Full Bullnose V30 Truelife
- The Full Bullnose V30 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
- Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
- Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Full Bullnose V30 Replacement Segments
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
- Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
- Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
- Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
-
OMA Router Bits by Weha
Oma Full Bullnose V40 Prodiam Cont Metal Pos 2
The Full Bullnose V40 Prodiam Cont Metal Pos 2 is diamond brazed technology bits that work excellent on marble, limestone, travertine.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
-
OMA Router Bits by Weha
Oma Full Bullnose V40 Extradiam Cont Metal Pos 3
- The Critical bit between the profile and polishing phase of the Oma system of bits.
- The first bit without a bearing to fully engage the stone in the polishing process.
- An optimum bit before starting the Oma polishing wheels or start with hand polishing.
- The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Full Bullnose V40 Truelife
- The Full Bullnose V40 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
- Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
- Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Full Bullnose V40 Replacement Segments
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
- Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
- Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
- Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
