Tenax Glaxs BB65
Tenax Glaxs BB65 Glue Super Flowing Pouch is a new generation bi-component resin with zero yellowing to the sun and UV rays. It is a transparent resin, solvent-free, low viscosity, and medium reactivity adhesive, and offers good penetration and hardness.
The resin can harden at 0°C and will stay bright also when the level of humidity is high and the temperature is low. It is ideal for white stone when a warranty against changing color against the sun is required. Tenax Glaxs BB65 315 gm is completely invisible and will not yellow or create shadows around cracks or seams. Recommended applications: white marble, white granite, and porous stone. The reactivity of the Tenax Glaxs BB65 Glue Super Flowing Pouch is not influenced by the temperature. VOC Compliant. No Hazmat.
You might also want to check the extensive line of Tenax Adhesives.
Instructions for use
Make sure the surface to be treated is completely dry and clean. Keep the glue and hardeners in their original containers. Measure out, in either weight or volume, the correct amounts of part A and part B. Mix well using clean tools. Best when applied in a thin layer. Use acetone or butyl acetate to clean tools.
| Technical Data | |
|---|---|
| Viscosity resin cps 77° 20 r.p.m.(ASTM D2196) | 100-200 cps |
| Viscosity hardener cps 77° 20 r.p.m.(ASTM D2196) | 400-600 cps |
| Density resin/hardener at 77° gr/cm3 | 1.0/1.0 |
| Aspect resin/hardener | Liquids Transparent |
| Aspect resin hard | Transparent |
| GARDNER Color of the resin ASTM D1544 | Max 0.5 |
| GARDNER Color of the hardener ASTM D1544 | Max 0.5 |
| Mixing Ratio resin+hardener in weight | 100+65 = 165 (Total) |
| Gel time in bulk at 77° (100 gr resin+hardener) | Approximately 30-35 min |
| Tacky free in thin layer at 77° @ 50% relative humidity | 1h45min |
| Tacky free in thin layer at 104° @ 10% relative humidity | 1h45min |
| Hardness in Shore D (1) ASTMD 2240 | 65-70 |
| Glass transition temperature Tglass (ASTM E1545) (1) | N.A. |
| Peeling test with glass fiber on marble (1) (ASTM D3167) | 1 N/mm |
| Adhesion force on marble (ASTM D4541) (1) | 13 Mpa |
| Adhesion force on glass (ASTM D4541) (1) | 6 Mpa |
| Weathering test on climatic chamber Qsun, (ASTM D904), 3 years of outdoor condition, light + rain + thermal shock | Passed, no detachment of resin from the support |
| Yellowing test on the Xenon chamber 15 years (ISO11341) | No Change |
| Minimum reaction temperature | 34° |
| Minimum temperature of use after hardening | -77° |
| Maximum temperature of use after hardening | 140° |
| Working time at 77° (time for polishing or cutting) | 24 hours |
Shelf life
Keep the containers closed after use. Keep away from heat, humidity, and sunlight. This product will last 1 year under normal conditions between 65° and 77°.
Safety
Please read the safety data sheet before use and follow the product instructions.
Reviews
There are no reviews yet.