Wet Only
Wet Only Categories
Wet Only
Showing 37–48 of 91 results
-
Glass Blades
Cyclone Glass Blade
- Diamond bond specifically made for glass tile
- For clean and precise cuts in glass
- Cuts glass and white backing chip-free
- Wet use
- 5/8″-11 Arbor Size
- Available in 4.5, 7, and 10″
- You can use the 4.5″ version with an Angle Grinder or a Hand Saw, or use the 7″ or 10″ with a Bridge Saw
-
Glass Blades
Cyclone Ultra Glass Blade
- Professional-grade bridge saw blade for glass, porcelain, and ultra-compact materials
- Delivers fast, clean, and precise cutting performance
- High concentration of fine diamond grit for exceptionally smooth cuts
- Produces clean and straight miter edges with high cutting efficiency
- Designed exclusively for wet cutting applications
- Advanced silent core technology reduces operating noise
- Improves cutting stability and overall efficiency
-
Wet Polishers By Diamax
Cyclone Convex Polishing Disks
Cyclone Convex Polishing Disks are Convex Polishing Pads, applicable for angle polishing machines, used to polish the edge of the countertop’s inner hole.
- Pads are useful for ogee edge polishing
- Good for polishing difficult to reach areas like inside corners of sink cutouts
- Velcro backed for use with 3″ (76mm) backer pad
CAN BE USED ON
MATERIALS
USE
Angle Grinder, Pneumatic Machine Engineered Stone, Granite Wet Only -
Router Bits, Router Bits By Diamax
Cyclone Bevel Router Bits
- The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
- Double-breaker bits for full-bull nose prep 3mm diamond depth
- 50% more diamond surface than the industry standard
- Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
- 8,000 Max RPM
- Special shapes, sizes, and grits available upon request
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Calibrating Wheel
- CNC Calibration Wheels prepare the slab by gauging or reducing the thickness
- This tool gives you a consistent edge
- For use on Engineered Stone or Granite
- Approximate Recommended Feed Rate is 35-70 inches per minute (IPM)
- For Wet use only
- 4″ diameter size
- Choose between 25 or 32 segments
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Z Wheel
- Available in both 60 mm and 80 mm
- Ultra-aggressive design for fast work at minimal spindle feed
- Extends the life of the first position on your profile bit sequence
- Ideal for Engineered Stone and Granite
- For Wet use only
- The 60mm variation has 15 segments, while the 80mm one has 21 segments
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone CNC Core Bits
- T-segment design with new diamond technology increases life and minimizes segment loss
- Designed with slot-openings on each side which prevents blow-outs
- Half-gas threading for CNC machine use
- Feed Rate: 30mm slab/2 IPM
- Ideal for working with Engineered Stone and Granite
- For Wet use only
- 2,300 Maximum RPM
-
Router Bits By Diamax
Cyclone Demi Bullnose Router Bits
- The most popular edges always in stock: ogee, full-bull,demi-bull available in coarse and medium
- Double-breaker bits for full-bull nose prep 3mm diamond depth
- 50% more diamond surface than the industry standard
- Contain ISD 1700 grade diamonds- the hardest, most expensive industrial diamonds available today
- 8,000 Max RPM
- Special shapes, sizes, and grits available upon request
-
Special Cup Wheels
Cyclone PCD Wheel
- Made from PCD (polycrystalline diamond), designed for aggressive removal of hard and tacky surfaces.
- Available on 5″ and 7″ diameter sizes
- Steel body
- Medium 50/60 Grit. PCD Wheels are more aggressive than regular Diamond Wheels, work very well on Epoxy, and Urethane, and old paint
-
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Combo Finger Bit
- Faster incremental cutting with a larger bottom segment
- Up to 3/8″ stock removal per pass
- Overall, cutting time is shorter by 60%
- Fastest cutting finger bit for 5-axis saws
CAN BE USED ON
MATERIALS
USE
CNC Machine Engineered stone, granite Wet Only -
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Finger Bits
Cyclone Finger Bits bottom segment gives the CNC operator the option of drilling into the slab like a core bit. The 7 segment finger bit has the first-ever reverse apple core design.
- Available in 1 ⅝” and 2 ½” for different granite thickness
- The bottom segment gives the CNC operator the option of drilling into the slab like a core bit
- The 7 segment finger bit has the first-ever reverse apple core design – thicker in the middle
CAN BE USED ON
MATERIALS
USE
CNC Machine Engineered Stone, Granite, Marble Wet Only -
CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Ultra CNC Core Bit
- Specific metal bond and diamond composition provide fast and clean milling in Porcelain and Ultra-compact material
- 8-segment design ensures a well-balanced, smooth cut
- Ideal for working with Engineered Stone, Granite, Porcelain/Tile, and Ultra-compact
- Wet use only
