Shop
Showing 2851–2865 of 3245 results
-
Sealers & Impregnators by Bellinzoni, Akemi and Others
Akemi L-1 Basic Crystallization 5L Blue
- Terrazzo, limestone, and marble crystallizers are specially formulated for vitrifying big surfaces.
- It provides the pavement with waterproofing and hardness for high traffic resistance.
- It neither slides nor marks footprints.
- Easy to use
- Extends life of polished stones
- It greatly reduces the need for restoration
- Requires much less time as compared to traditional strip and finish methods (floor stripper& acrylic floor finish)
-
Sealers & Impregnators by Bellinzoni, Akemi and Others
Akemi L-2 Finish Crystallization 5L Pink
- Terrazzo, limestone, and marble crystallizer specially formulated for vitrifying big surfaces.
- It provides the pavement with the needed waterproofing and hardness for high traffic resistance.
- It neither slides nor marks footprints.
- Easy to use
- Extends life of polished stones
- Greatly reduces the need for restoration
- Requires much less time as compared to traditional strip and finish methods (floor stripper& acrylic floor finish)
-
Sealers & Impregnators by Bellinzoni, Akemi and Others
L-25 No Slip Crystallizer 5L
- Terrazzo, limestone and marble crystallizer specially formulated for the vitrifying of all type of surfaces that contain calcium carbonate, such as marble, terrazzo, hydraulic floor, etc.
- It is recommended in surfaces with a high traffic and risk of slip, such as residences, hospitals, schools, etc.
-
-
-
Sealers & Impregnators by Bellinzoni, Akemi and Others
L-9 Neutral Shine Protector 5L
- Concentrated cleaner specially formulated for the maintenance and conservation of crystallized or polished surfaces.
- Its daily use provides the necessary cleaning to all type of surfaces, taking care of the original shine and highlighting the colors.
-
Adhesives by Stone and Other, Caulk and Sealants, Cleaners & Maintenance by Akemi and Others, Solvents, Stain removers
Lanco Acetone
Adhesives by Stone and Other, Caulk and Sealants, Cleaners & Maintenance by Akemi and Others, Solvents, Stain removersLanco Acetone
- Helps thin lacquer, polyester and nitrocellulose for easier an application
- Soluble in water, alcohol and many volatile oils.
- High performance liquid formula
- For indoor and outdoor use
- Biodegradable
- Low VOC
-
Single Speed Grinders
Makita 4-1/2″ Paddle Switch Angle Grinder with AC/DC Switch GA4534
- Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications
- Compact design at only 4.2 lbs. for reduced operator fatigue
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Paddle switch design with no lock-on for added user preference
- AC/DC switch for use with alternative power source
- Protective zig-zag varnish seals the armature from dust and debris for longer tool life
- All-ball bearing design and metal gear housing for added durability
-
Variable Speed Grinders
Makita 4-1/2″ SJS High-Power Angle Grinder 9564CV
- Powerful 13 AMP motor delivers more output and variable (2,800 – 10,500) RPM
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Variable speed control dial enables user to match the speed to the application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Electronic current limiter helps protect the motor from overload
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
-
Single Speed Grinders
Makita 4″ Angle Grinder GA4030
- Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications
- Compact design at only 3.7 lbs. for reduced operator fatigue
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Slide switch design with lock-on for added user convenience
- Protective zig-zag varnish seals the armature from dust and debris for longer tool life
- All-ball bearing design and metal gear housing for added durability
- Machined bevel gears provide up to 2x longer service life than previous models
-
Single Speed Grinders
Makita 7″ Angle Grinder with AC/DC Switch GA7021
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life
- Zig-zag varnish protects the armature coil from dust and debris for longer motor life
- Large rubber tool rest protects work piece from damage
- AC/DC switch for use with alternative power source
- Rubberized back handle for increased operator comfort
- Externally accessible brushes for easy serviceability
