Blastrac 10 in Arrow Sawtec Plate

Blastrac 10 in Arrow Sawtec Plate

Blastrac 10 in Arrow Sawtec Plate is an aggressive rotary diamond grinding plate engineered to rapidly remove heavy coatings, thick mastic, polyurethane adhesives, and elastomeric membranes on walk-behind single-head floor grinders. Configured with 10 high-profile diamond arrow segments, this plate focuses machine downforce onto sharp leading-edge points that slice through stubborn surface barriers rather than smearing them under friction heat. The directional geometry of each arrow segment actively carves out elastomeric layers while channeling debris outward to prevent diamond gumming and glazing.

Weighing 2 lbs, this 10-inch plate is built on a precision-machined steel disc with standard bolt mounting holes and a central pilot bore for direct attachment to Blastrac and compatible rotary floor grinder drive plates. Operating wet or dry with dust extraction shrouds, the 10-segment arrow layout delivers ideal surface pressure for concrete prep contractors who need high stock removal rates, fast coating tear-out, and an open mechanical anchor profile on cured slabs.

Main Features

• 10 Aggressive Arrow Segments: Sharp, pointed diamond segments slice directly through thick coatings and mastic without gumming up.
• Maximized Downward Pressure: 10-segment count concentrates machine weight across fewer contact points for deeper, faster penetration.
• Anti-Smear Directional Cutting: Arrow profile channels pulverized debris outward, keeping diamonds cool and exposed.
• Standard 10-Inch Disc Geometry: Machined with a center pilot bore and bolt-hole pattern for secure mounting on 10″ rotary grinder heads.
• Dry & Wet Versatility: Operates dry with dust extractors for clean containment or wet for slurry lubrication.

Specifications