Blastrac equipment supports concrete surface preparation, grinding and shotblasting. Explore the listed hand grinder and shotblasters, including the 1-8DM and 1-10DSGI, and compare working width, power requirements and dust collection compatibility for your project.
Blastrac
Showing all 9 results
- Diamond Tooling, Equipment & Instruments, Surface Preparation
Blastrac 10 in Arrow Sawtec Plate
- 10-inch rotary diamond grinding plate designed to aggressively remove heavy coatings, thick mastic, polyurethane adhesives, and elastomeric membranes.
- 10 high-profile diamond arrow segments concentrate downward pressure on sharp leading edges for fast penetration and efficient removal of coatings.
- Precision-machined steel disc provides a durable grinding platform for demanding concrete surface preparation.
- Suitable for both wet grinding and dry operation with compatible dust extraction shrouds.
- Diamond Tooling, Equipment & Instruments, Surface Preparation
Blastrac 10 in L-Segment Grinding Blade
Diamond Tooling, Equipment & Instruments, Surface PreparationBlastrac 10 in L-Segment Grinding Blade
- 10-inch diamond grinding disc for aggressive concrete surface preparation, floor leveling, and removing stubborn coatings and adhesives.
- 20 heavy-duty L-shaped diamond segments in an angled chevron configuration deliver efficient stock removal and cut through thinset, epoxy remnants, adhesives, and concrete high spots.
- Angled segment channels efficiently evacuate concrete dust and abrasive debris, helping prevent diamond glazing and maintain cutting performance.
- Suitable for both wet and dry grinding applications, including dry operation with vacuum dust extractors.
- Power Tools, Surface Preparation, Tools & Supplies
Blastrac 7 in Hand Grinder with Premium Shroud
- High-Torque 15 A Motor: Operates at 6,600 RPM with a standard 5/8″-11 threaded spindle, built to drive 7-inch diamond cup wheels and grinding discs.
- Near-Zero Dust Grinding: Includes a tool-free one-piece premium shroud with a 2-inch port that pairs with Blastrac dust collectors (BDC-1112EU / BDC-1216) to virtually eliminate airborne dust.
- High Job-Site Output: Capable of prepping 150–200 sq. ft. per hour in tight, detail-heavy areas.
- 3-Position Auxiliary Handle: Configurable on the left, right, or top of the housing for maximum leverage and ergonomic control.
- Equipment & Instruments, Surface Preparation
Blastrac HEPA Filter P003934 for 654DC
- HEPA-grade filtration captures microscopic concrete dust, airborne particulate, and respirable crystalline silica fines down to sub-micron sizes.
- Deep-pleated microfiber media with corrugated separators maximize filtration surface area, support high dust-holding capacity, and maintain stable airflow.
- Rigid perimeter box frame withstands high negative air pressure and resists structural deformation during demanding extraction cycles.
- Perimeter elastomeric gasket creates an airtight, zero-bypass seal to prevent unfiltered air from escaping around the filter.
- Helps maintain consistent suction performance, protect vacuum blower components, and support silica dust-control requirements when used in a compliant system.
- Equipment & Instruments, Surface Preparation
Blastrac Replacement Air Filter 4932060
- Designed specifically for Blastrac concrete shot blasting systems to maintain efficient dust containment and reliable airflow.
- Captures fine concrete dust, coating residue, and abrasive particles, protecting vacuum blowers from premature wear and overheating.
- High-capacity pleated filter media maximizes surface area for effective dust retention and extended service intervals.
- Rigid construction and precision-molded end caps provide an airtight seal to prevent dust bypass and maintain vacuum suction.
- Direct drop-in replacement design simplifies installation and helps minimize maintenance downtime.
- Durable 4.40 lb cartridge engineered for demanding industrial floor preparation environments.
- Diamond Tooling, Equipment & Instruments, Surface Preparation
Blastrac Tornado Cup 50/60 Grit
- Designed for concrete polishing, scratch refinement, and edge smoothing on compatible 5-inch angle grinders and surface preparation equipment.
- 18 curved tornado diamond segments provide continuous cutting action, smooth material removal, and efficient debris evacuation.
- 50/60 medium-fine diamond grit removes coarse tooling scratches and prepares concrete, terrazzo, and masonry for finer polishing stages.
- Large perimeter cooling cutouts improve airflow, dissipate friction heat, and help prevent premature diamond segment glazing.
- Lightweight 1.25 lb steel body promotes balanced rotation, reduces vibration, and helps minimize operator fatigue.
- Dish-style design with a center bore mounts securely to compatible 5-inch grinder spindles using standard flange nuts.
- Suitable for both wet and dry grinding applications, including dry operation with compatible dust extraction systems.
- Equipment & Instruments, Surface Preparation
Blastrac Wheel Kit B20536K
- OEM replacement blast wheel assembly designed for Blastrac 1-10 series walk-behind shot blasting machines.
- Complete rebuild kit includes the blast wheel, directional control cage, and mounting hardware for direct installation.
- Compatible with Blastrac 1-10D, 1-10DS, 1-10DS99, and 1-10D99 shot blasters.
- Restores consistent blast patterns and abrasive throwing velocity by replacing worn or damaged components.
- Heavy-duty 12.40 lb cast alloy construction withstands high-velocity impacts from steel shot and abrasive grit.
- Supports demanding surface preparation applications, including coating removal and concrete, asphalt, and runway maintenance.
- Shotblasting & Scraping
Husqvarna Blastrac 1-8DM
- The lightweight unit is easy to handle and transport
- Shot pattern reducers are available in 4, 5, and 6 in
- The simple design uses fewer moving parts, requires less maintenance
- Can blast within 1-1/2 in of front wall and edges to within 3/4 in when side magnet seals are removed
- Heavy-duty blast wheel drive system with 2 or 3-hp motor, belt drive, and long-life bearing unit
- Operates virtually dust-free when connected to BDC-1216 or BDC-22

