Cyclone Ultra Incremental Bit
Cyclone Ultra Incremental Bit is for use on sink cut-out machines. Its specific metal bond and diamond composition provide fast, clean milling in porcelain and Ultra-compact materials. The micro-incremental bits are designed for cutting at higher speeds. Used to mill tight corners and outlet holes.
Cyclone is the premium line of Diamax products, a well-established company in the USA since 1996 that has earned a superb reputation among the stone fabrication community, with a return ratio of less than 1%. You might also want to check our other CNC Tools, where you will find a lot of premium tools for your job with CNC equipment and Auto Edge Machines.
Incremental Bit Features
Among these Bits features, we find:
- For use on sink cut-out machines
- Specific metal bond and diamond composition provide fast and clean milling in porcelain and Ultra-compact material
- Micro-incremental bits are designed for cutting at higher speeds. Used to mill tight corners and outlet holes.
- Reverse thread options available
- Wet use only
Ultra Incremental Bit Technical Specifications
| ITEM # | DIAMETER | USABLE LENGTH | FITTING | BOND | RPM |
|---|---|---|---|---|---|
| FBTU2020 | 20 mm | 20 mm | M12 | Medium | 4,2 |
| FBTU20RT | 20 mm | 20 mm | M12 reversed | Medium | 4,2 |
| FBTU08RT | 8 mm | 15 mm | 1/2 gas reversed | Medium | 4,2 |
| FBTU10RT | 10 mm | 15 mm | 1/2 gas reversed | Medium | 4,2 |
| FBTU0815 | 8 mm | 15 mm | 1/2 gas | Medium | 4,2 |
| FBTU1015 | 10 mm | 15 mm | 1/2 gas | Medium | 4,2 |
| FBTU1215 | 12 mm | 15 mm | 1/2 gas | Medium | 4,2 |
Incremental Accessories
| SKU | DESCRIPTION | SHAFT LENGTH | FITTING |
|---|---|---|---|
| FBSTIP-M | Cyclone mandrel with sleeve | 70mm | M12 female – ½ gas male |
| FBSM-RT | Reverse thread Super Cyclone mandrel | 70mm | M12 female – ½ gas male |
| FBSM35 | Super Cyclone Mandrel Thread (short) | 35mm | M12 female – ½ gas male |
| FBSM-RT25 | Reverse thread Super Cyclone mandrel (short) | 25mm | M12 female – ½ gas male |
There are no reviews yet.