AKEMI Stain Repellent W

AKEMI Stain Repellent W

AKEMI Stain Repellent W is a special impregnation that repels water, grease, and oil, providing excellent protection for flooring, table tops, and working surfaces made of absorbent natural and artificial stone, including marble, Solnhofen stone, sandstone, and fine stoneware. Suitable for both indoor and outdoor use, it prevents staining or makes spot removal easier while allowing the stone to breathe. Free of solvents and with a faint odor, it is ideal for use in rooms already in use and is particularly effective on humid surfaces. It is also perfect for cotto, terracotta, terres quites surfaces, and unglazed clay tiles and bricks.

Stain Repellent W Main Features

• Impregnation based on a solution dissolved in water.
• Foodsafe (certified by an external German testing institute).
• Very low emission (EMICODE® EC1PLUS).
• Emission class A+ (confirmed by an external testing institute).
• Beginning of protective effect (20°C): 1 – 2 hours.

Watch the Stain Repellent in action

Repellent W Specifications

Category	Details
Protecting & Impregnating	Premium protection (natural)
Surface	Rough, Fine-ground, Ground, Satinated, Bush-hammered, Sand blasted, Antique, Sawn, Rough sawn, Rough, Polished, Flamed
Chemical Basis	Water-based
Method of Application	Wide brush, Mop, Manual, Spraying application
Material	Natural stone, Marble and limestone, Granite, Ceramics, Terrazzo, Slate, Concrete ashlar, Cotto
Area of Application	Flooring & stairs, Garden & terrace, Gravestone & monument, Facade, Food area
Concentration	Ready-to-use

Where to use:

• Rough natural & Artificial stones
• Polished stones can also be protected. The impregnation is not suited for polished stones which are sensitive to acid
• To be used on rooms, kitchens, bathrooms, and other areas
• It is not suited for glazed and non absorbent surfaces

To get the best out of AKEMI Stain Repellent W:

• The surface must be clean, totally dry and free from all layers
• Shake well before use
• To evaluate the efficiency, appearance and material consumption prepare a sample area
• Avoid direct sunlight and moisture until the development of the water and oil repellent effect
• Depending on the absorbency apply one or more times fully and evenly
• Always apply on the whole surface
• Remove surplus material with an adequate cloth or fabric approx. 20 minutes after the last application