Tenax Dekton Bridge Saw Blade
Tenax Dekton Bridge Saw Blade solves the problem of stone fabrication professionals who find themselves struggling to cut Dekton® materials because of their hardness. These surfaces continue to grow in the market and require tools designed to perform well on them. Tenax has designed this diamond blade to effectively cut through the Dekton® surfaces. This blade will enable fabricators to cut Dekton® materials confidentially and will produce a clean straight cut with minimal chipping during the process.
There’s no denying the latest trend of Dekton® and ceramic materials in the market. Most of your fabricators struggle with cutting these materials. Tenax has a new line of blades that will help your fabricator cut with confidence and produce a clean edge with minimal chipping. You might also want to check our extensive line of Tenax Blades.
- Specifically marketed to Dekton users
- 1,800-2,100 RPM
- Feed rate/straight cut: 600-1000mm per minute
- Feed rate/miter cut: 350-800mm per minute
- Standard 2.3mm core thickness
- Approved by Cosentino
Technical Information for Tenax Dekton Blades
|Dekton Thickness||RPM Ø360||RPM Ø410||RPM Ø460||EED SPEED FT/min 48”- 60”|
|8mm||2,100 – 2,400||1,700 – 2,100||1,500 – 1,800||48”- 60”|
|12mm||2,100 – 2,400||1,700 – 2,100||1,500 – 1,800||40”- 48”|
|20mm||2,100 – 2,400||1,700 – 2,100||1,500 – 1,800||24”- 40”|
|30mm||2,100 – 2,400||1,700 – 2,100||1,500 – 1,800||16”- 24”|