Shop
Showing 2509–2520 of 3311 results
-
Diamax Pneumatic Tools
Cyclone Pneumatic Air Grinder
- A dual-water feed system prevents dust from dispersing into the air
- 6” guard with an integrated water feed for cutting with shut-off value
- Internal water feed for coring and grinding
- Easy to use push connect air and water connections
- Automatic oil injection system
- Powered by an air compressor, extending lifespan significantly
- 60-day warranty
-
Weha Pneumatic Tools
Weha Blizzard Rear Exhaust Center Water Feed Air Polisher
- The Blizzard Granite Air polisher is a Rear Exhaust Air polisher that does not lose power during the granite and stone polishing process.
- The Blizzard Center Water Feed stone polisher comes with 2 hoses. 1 for air. 1 for water. Both feed on the back of the tool.
- The nice advantage of Rear Exhaust Air polishers is the fact that air is not blowing on the hands or the potential of blowing oil onto the surface of the stone and creating a stain.
- Still, very lightweight at only 3.5 lbs, the Weha Blizzard Rear Air Polisher is easy to handle and will not create user fatigue.
-
Weha Pneumatic Tools
Weha High-Speed Water feeds Air Grinder & Cutter WH185
- The Weha WH185 can also be run without water as well.
- The Weha WH185 comes with a paddle trigger to have complete control over the air cutter at all times. Also, the WH185 has a solid handle to keep cutting and grinding easy with less fatigue.
- The WH185 Air Cutter is made to work with a 5″ blade to cut granite, marble, quartz, quartzite, stone materials.
- The great thing is that it uses less air than other air grinders. It only requires 9.8 CFM at 90 PSI.
-
Weha Pneumatic Tools
Weha Speedy Side Exhaust Center Water Feed Air Polisher
- Comes with Wrench, side handle, water guard, air hose, and water hose.
- Side Exhaust.
- The Weha Speedy Water Feed Granite Air Polisher is made with upgraded premium bearings to run 24 hours a day.
- The great thing about the Weha Speedy Water Feed Air Polisher is that it runs off of 16cm. This means it will not slow down or lose power during the polishing process.
- At 5,000 RPM, the Weha Speedy granite Air Polisher is one of the fastest polishers on the market.
- With the weight at only 2.6 lbs, the fabricator can run this wet air polisher all day without having user fatigue.
-
Stone & Others
STONE Pneumatic Wet Stone Cutter
STONE Pneumatic Wet Stone Cutter, This wet air saw is designed to wet cut granite, marble, quartz stone, engineered stone with air, it could be used with o without water but it is safer when used wet. The wet air stone cutter can accept 5″ (125mm) diamond blade.
-
Stone & Others
Stone Pneumatic Wet Polisher
- Poses no electric hazards.
- Center water feed function reduces dust and improves environmental protection.
- Rear exhaust keeps exhausts away from the stone.
- Center water feed with side exhaust
- Air Cons: 0.22 m3/min 8 CFM minimum 12 CFM optimal
- Air Pressure: 90 psi
- Lightweight, compact
-
Alpha Pneumatic Tools
ALPHA AIR-680UW Underwater Pneumatic Polisher
- High-Performance, Pneumatic Polisher for Underwater Applications
- Central Water-Feed System Delivers Ample Water Regardless of Position for Plaster Polishing
- No-Load RPM- 4,000
- 15ft. All-Weather Air & Water Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- 30ft. All-Weather Air Hose with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- 27ft. Flexible Exhaust Hose included
- 7″ Rotary Backer Pad, 7″ 50 Grit and 7″ 100 Grit PlasterKing Pads Included
-
Alpha Pneumatic Tools
ALPHA AIR-830/AIR-834/AIR-850/AIR-854 Pneumatic Polishers
- High-Performance, Pneumatic Polisher
- Central Water-Feed System Delivers Ample Water Regardless of Position
- No-Load RPM- 5,500 for AIR-850 / 4,000 for AIR-830
- 15ft. All-Weather Hoses with Flexibility Down To -40°F Or +140°F (-40°C Or +60°C)
- Newly Developed Motor Produces More Power
- Lightweight and Ergonomically Designed for Better Maneuverability
- New Splash Guard Allows For Better Visibility Without Being Splashed
5/8″-11 is the standard spindle thread size in the United States.
-
Alpha Pneumatic Tools
ALPHA PSC-150 Pneumatic Stone Cutter
- 2 HP Pneumatic Powered Motor with Speed Control Governor
- Capable of Miter Cutting 1-1/4″ (3cm) Material With Ease
- Kink-Free Water and Air Hoses for Easy Maneuverability and Reducing Operator Fatigue
- Great For Sink-Hole Cutting, Groove Cutting and Rodding Applications
- 2,000 Hour Duty Cycle
- Comes With an Eclipse II 6” Blade and a bottle of Rust Inhibitor Oil
- Can Be Used Wet or Dry
