Stone Plus Finger Bit Tips 12mm Thread Adapter
- These adapters are for diamond finger tip bits on wizzard and similar CNC machines.
- Stone Plus finger bit adapter 1/2 gas male to M12
Core Bits and Finger Bits for CNC Machines, Specialty Backer Pads & Adapters
Stone Plus Finger Bit Tips 12mm Thread Adapter
- These adapters are for diamond finger tip bits on wizzard and similar CNC machines.
- Stone Plus finger bit adapter 1/2 gas male to M12
Price$27.31
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 5 × 4 × 2 in |
Based on 0 reviews
Be the first to review “Stone Plus Finger Bit Tips 12mm Thread Adapter”
You must be logged in to post a review.
Related products
- Core Bits and Finger Bits for CNC Machines
Oma Dekton CNC Finger Bit
The Finger Bit System has produced a CNC Finger Bit specifically for Dekton, Porcelain, Ceramic, Sintered Stone materials. Twin 8 segment design with ½ gas connection made for all CNC machines.
- Twin 8 segment design with ½ gas connection made for all CNC machines.
- Designed for 400′- 450′ of life.
- The 50mm (5cm) Dekton Finger bit is designed for 4cm and 5cm (40mm and 50mm) material only due to the placement of the water slots. If using on 20mm (2cm) or 30mm (3cm) material, please purchase the 20mm or 30mm OMA Dekton Finger Bit
-
- Core Bits and Finger Bits for CNC Machines
Weha Weramic CNC Porcelain Ceramic Core Bits
- The Weramic CNC porcelain and ceramic core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other CNC machines.
- Weramic CNC porcelain core bits have been built to core perfectly smooth, chip-free holes on all thickness materials from 6mm, 8mm,10mm, 12mm 20mm, and 30mm.
- Weramic CNC porcelain and ceramic core bits have only a 2mm thick rim. These thin wall core bits will drill very clean and fast through the porcelain and ceramic materials.
- The Weramic CNC porcelain and ceramic core bit is one of the best Dekton, Lapitec, or Neolith CNC core bits that you can put on your CNC machine
- CNC Tools By Diamax, Core Bits and Finger Bits for CNC Machines
Cyclone Finger Bits
Cyclone Finger Bits bottom segment gives the CNC operator the option of drilling into the slab like a core bit. The 7 segment finger bit has the first-ever reverse apple core design.
- Available in 1 ⅝” and 2 ½” for different granite thickness
- The bottom segment gives the CNC operator the option of drilling into the slab like a core bit
- The 7 segment finger bit has the first-ever reverse apple core design – thicker in the middle
CAN BE USED ON
MATERIALS
USE
CNC Machine Engineered Stone, Granite, Marble Wet Only
There are no reviews yet.