Achilli TFR-A Automatic Bench Saw

Achilli TFR-A Automatic Bench Saw

Achilli TFR-A Automatic Bench Saw is a high-production granite and stone bridge saw designed for shops producing 1–2 kitchens per day as well as high-volume fabrication facilities that need additional cutting and fabrication speed. Its compact, sturdy structure requires no foundation and is designed for production work, with a motorized head offering variable forward and reverse travel from 0–21 ft/min. The entire bridge tilts manually from 90° to 45° for full-length miter and bevel cuts, while the blade head itself remains fixed and does not tilt. This design eliminates bearings and moving bridge or motor components that could loosen and compromise precise miter cuts. The saw also features hydraulic pop-up rollers with 32 omni-directional rollers for easy slab loading, turning, positioning, and adjustment.

The Achilli TFR-A Automatic Bench Saw includes a 145-gallon water collection and recycling tank with a pump rated up to 66 gallons per minute; the tank bolts directly to the machine frame to conserve water, recover more water from the saw bed, protect the pump and tank from damage, and allow cleaning underneath the machine. The pump starts automatically with the main motor and shuts off when the motor stops. A laser diode mounted on the head marks the blade cutting line, while six 20-inch-wide worktable extensions can be mounted on either side to increase total width from 47″ to 56″ on one side or 76″ on both sides for full-slab support. The TFR-A also includes separate powered Z-axis blade-height adjustment for step cutting, plunge cutting, depth control, straight cuts, and miter cuts; a full control panel; a 5.5 HP motor capable of cutting 3 cm of material without slowing; and acceptance of 10″, 12″, and 14″ diamond blades.

Main Features

• Production bridge saw for granite and stone fabrication
• Ideal for shops producing 1–2 kitchens per day and high-production facilities
• Sturdy, compact structure with no foundation required
• 5.5 HP (4 kW) 220V three-phase motor
• Cuts 3 cm material without losing power
• Accepts 10″, 12″, and 14″ diamond blades
• 1″ (25.4 mm) blade arbor
• Full-length manual bridge tilt from 90° to 45° for miter and bevel cuts
• Bridge system tilts instead of the blade head, helping maintain accurate miter alignment
• Motorized X-axis head travel with variable speed from 0–21 ft/min forward and reverse
• Variable-speed X-axis controlled by inverter
• Powered Z-axis blade-height adjustment for step cuts, plunge cuts, and depth control
• Hydraulic pop-up roller table with 32 omni-directional rollers
• Water collection and recycling system with 145-gallon steel tank
• Water pump with maximum capacity of 66 gallons/minute
• Automatic pump activation with main motor start/stop
• Premium laser diode mounted on the cutting head
• Six 20″ side extensions for full-slab support
• Cutting table width: 36″
• Total width: 47″ without side extensions
• Total width: 56″ with one side extension
• Total width: 76″ with side extensions on both sides
• Epoxy powder-coated machine structure
• Galvanized steel worktable rails
• E-chains protect and guide moving cables
• Main electrical panel with isolator, emergency stop, reset, motor start/stop, and head controls
• Emergency stop button on the cutting head
• Includes side stop (squaring bar), two adjustable limit-switch stops, service wrenches, and user/maintenance manual

Technical Specifications

Property	Value
Length of Cut	10′ 8″ (130″ / 3300 mm)
Diamond Blade Size	10″, 12″, 14″
Blade Arbor Size	1″ (25.4 mm)
Motor	5.5 HP (4 kW), 220V, 3 Phase
Motor Speed	3400 RPM
Total Machine Length	14′ 8″ (178″)
Cutting Table Width	36″
Total Width Without Side Tables	47″
Total Width with One Side Extension	56″
Total Width with Both Side Extensions	76″
Total Height	69″
Net Weight, Without Accessories	1,575 lb
Head Travel Speed	0–21 ft/min, Forward and Reverse
Bridge Tilt	90° to 45°
Water Tank Capacity	145 gal
Water Pump Capacity	Up to 66 gal/min
Roller Table	32 omni-directional hydraulic pop-up rollers

Installation

The TFR-A does not require professional installation. Setup consists of leveling the bridge saw, wiring the 220V three-phase motor into the building power supply, filling the water tank, and installing the blade.

Warranty

Achilli provides a 12-month warranty and reserves the right to repair or replace, free of charge, any mechanical part proven after technician inspection to have a manufacturing defect. Electrical and electronic components are covered only when the respective manufacturers acknowledge the defect as a warranty issue. The customer must pay freight and packing expenses for returning parts to the factory for repair or replacement, as well as the cost of returning repaired or replacement parts to the customer.

Achilli TFR-A Automatic Bench Saw Video