Weha Blizzard Rear Exhaust Center Water Feed Air Polisher
Weha Blizzard Rear Exhaust Center Water Feed Air Polisher is a premium quality air polisher designed to work in granite and stone fabrication.
Great for polishing edges and inside bowl holes. With the Specs listed below, you will find that the Weha Blizzard is the best granite air polisher to be used by stone fabricators.
You might also want to take a look at our other Pneumatic Wet Tools Machines.
Product Features
- The Blizzard Granite Air polisher is a Rear Exhaust Air polisher that does not lose power during the granite and stone polishing process.
- The Blizzard Center Water Feed stone polisher comes with 2 hoses. 1 for air. 1 for water. Both feed on the back of the tool.
- The nice advantage of Rear Exhaust Air polishers is the fact that air is not blowing on the hands or the potential of blowing oil onto the surface of the stone and creating a stain.
- Still, very lightweight at only 3.5 lbs, the Weha Blizzard Rear Air Polisher is easy to handle and will not create user fatigue.
| Features | Advantages |
|---|---|
| 3.5 lbs | Light for all-day use |
| 16cfm @90psi | Does not slow down |
| Rear Exhaust | Keeps hands warmer and zero chance of oil on the stone |
| Front and side handle | Fabricators can choose their preference of how they want to polish: front, side, or no handle |
| Up to 5000 RPM | Perfect polishing speed for wet and dry polishing |
| Air and water hose | Connect and go |
| Hose Sleeve | Keeps hoses together |
| Head grease Port | Doubles the life |
| Premium bearings | Lasts longer |
| Center water feed | Guarantees the correct water supply to the polishing pads from the inside out |
Warranty
10, 90, 90+ warranty:
- 10 day Replaces the tool
- 90-day Warranty repair
- 90+ days repaired at a cost
Compare the Weha Blizzard to other premium air polishers on the market and you will find that the Weha Blizzard will last just as long, and be just as strong. The Weha Blizzard air polisher will prove to be the best granite and stone air polisher built for stone fabrication.
Please read the manual before use. Lack of proper maintenance will void the warranty. Always make sure the machine is properly greased and does not run over 90 PSI.
Please do not include hoses and attachments when sending machines in for repair. We will not assume liability for these. Also please make sure to indicate what is wrong with the machine.
There are no reviews yet.