ALPHA Pneumatic Stone Cutter PSC-150

$690.00

ALPHA Pneumatic Stone Cutter PSC-150 is a powerful pneumatic stone cutter for industrial applications, a portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease.

Out of stock

ALPHA Pneumatic Stone Cutter PSC-150

Alpha® is excited to introduce a new industrial quality pneumatic stone cutter, ALPHA Pneumatic Stone Cutter PSC-150 which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass.

In addition, Alpha® recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup.

Since it is a pneumatic powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications.

Alpha® offers a carriage that retrofits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination.

The ALPHA Pneumatic Stone Cutter PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air.

Equipment included:
The ALPHA Pneumatic Stone Cutter PSC-150 comes with an Eclipse II 6” blade which is the recommended turbo blade for granite and engineered stone. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less

  • Flanges (3)
  • Bolts (2) (M6x30 Left) / (M6x20 Left)
  • Side Handle (reversible)
  • Combination Wrench (9mm)
  • Hex Wrench (5mm)
  • Open end Spanner Wrench (22mm)
  • Air Hose (15ft. / 4.5m)
  • Rust Inhibitor Oil (8oz / 237ml)
  • Alpha Eclipse II 6″ Blade

ALPHA Pneumatic Stone Cutter PSC-150 Technical Specifications:

FeatureValue
Air Pressure90 PSI
Air Consumption32.8 CFM
No Load RPM8500
Weight10.14Lbs (4.6 Kg)
Air Inlet3/8″ BSPP
Water Inlet1/4″ BSPP
Arbor7/8″ (22mm)
Max. HP2.0
Cutting Disc Diameter6″
Weight8 lbs
Dimensions10 × 10 × 10 in

Reviews

There are no reviews yet.

Be the first to review “ALPHA Pneumatic Stone Cutter PSC-150”