Weha Large Heavy Duty Shop Cart Drywall
Weha Large Heavy Duty Shop Cart Drywall has 2 swivel wheels with locks and 2 fixed wheels that are 6″ and are built to safely hold 2640 lbs.
When fabricating larger, more fragile pieces of stone, you need to have as much support as possible when moving around the shop.
Also, as the stones get larger over 10′ and taller up to 80″, those oversized slabs need a larger cart than the traditional drywall shop carts.
The Weha Large Fabrication Shop Cart was made specifically for this. But, of course, it will take care of all the shop needs for marble, granite, quartz, quartzite, onyx, porcelain, sintered stone, and anything else that comes through the shop.
The Weha Large Shop Cart is made out of a 1½” diameter pipe with 3 bolted support bars to handle the weight of the stone. The surface deck is 53″ long x 16″ deep. The surface deck also comes with a white rubber mat. Between the support bars next to the surface deck, there is a space of 10″ for an additional storage area, perfect for backsplashes. Just slide a board in and you can set the backsplashes on top. This will allow you to keep the entire job, or 2, on one Shop Cart throughout the fabrication process. The load height dimensions of the Weha Large Shop Cart are 54″. For any size island or full slab, it will ride super safe with very little stress hanging above.
You might also want to take a look at our other Cart and Dollies by Weha.
Technical Specifications (compared to the Standard Cart)
|Property||Large Shop Cart||Standard Shop Cart|
|Dimensions||66″ (L) x 32″ (W) x 62″(H)||48″ (L) x 28″ (W) x 49″ (H)|
|Surface Deck||16″ x 53″||14″ x 44″|
|Height from Deck to Top of Cart||53½”||38½”|
|Swivel Wheels with Locks||2||2|
|Safe Weight Capacity||2,640 lbs||2,000|
|Diameter of Cart Tubing||1½”||1″|
|Weight||117 lbs||91 lbs|