Sale!

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M

$567.82

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M features Assist Mode, which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. It is ideal for driving longer fasteners

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M Highlights

INNOVATION: : Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading”
SPEED: : 4-speed power (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM)
EFFICIENCY: : Tightening Mode (T-mode) for faster tightening of self-drilling screws
DESIGN: : Compact and ergonomic design at only 4-5/8″ long; weighs only 3.3 lbs. with battery
INCLUDES: : Includes – (2) 18V LXT Lithium-Ion batteries, rapid charger and tool case

About Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M…

Makita has a legacy of innovation in the cordless impact driver category, and the XDT12M sets new standards. The XDT12M has more torque and more speed than previous models, yet it has more features and the most compact size in the 18 volt category. For contractors, the XDT12M is a total fastening solution.

The XDT12M offers users four speed settings, as well as Makita’s exclusive Quick-Shift Mode for increased fastening control. Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Another precision setting is Tightening Mode (T-mode), which downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work.

In addition, the XDT12M features Assist Mode, which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. It is ideal for driving longer fasteners.

The Makita-built BL Brushless Motor delivers a full 1,550 in.lbs. of Max Torque in the 4th speed setting. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts. It weighs only 3.3 lbs. with the 4.0Ah battery, and with a length of only 4-5/8″ it is the most compact in its category.

It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M Features

  • Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
  • BL Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max Torque
  • 4-speed power selection switch (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
  • Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
  • Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
  • Compact and ergonomic design at only 4-5/8″ long
  • Weighs only 3.3 lbs. with battery for reduced operator fatigue
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
  • All metal gear housing for increased job site durability
  • 3-stage battery gauge indicates battery charge level
  • Convenient one-touch 1/4″ hex chuck for quick bit changes
  • Built-in dual L.E.D. lights illuminate the work area
  • Rubberized soft grip provides increased comfort on the job
  • Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
  • Makita’s proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B features an integrated L.E.D. battery charge level indicator
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B provides up to 35% more run time per charge*
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B reaches a full charge in 40 minutes or less
  • Rapid Optimum Charger communicates with the battery’s built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
  • Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
  • Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
  • Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
  • 3-year warranty on tool, battery and charger
  • *compared to BL1830
  • Only use genuine Makita batteries and chargers

LXT Brushless     XPT- Extreme Protection Technology    Star Protection Computer Controls       Makita Quick Shift       4.0Ah Battery Charge Indicator      40 Minute Charge Time      Makita 3 Year Lithium-Ion Tool and Battery Warranty     


The LXT Advantage

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M includes:

(1) 18V LXT Brushless 4-Speed Impact Driver (XDT12Z)
(2) 18V LXT Lithium-Ion 4.0Ah Battery (BL1840B)
(1) 18V LXT Lithium-Ion Rapid Optimum Charger (DC18RC)
(1) Tool Case (824774-7)

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M Specifications

FeatureValue
Hex Shank1/4″
No Load Speed (var. 4 spd.)0 – 1,100 / 0 – 2,100 / 0 – 3,200 / 0 – 3,600 RPM
Impacts Per Minute (var. 4 spd.)0 – 1,100 / 0 – 2,600 / 0 – 3,600 / 0 – 3,800 IPM
Maximum Torque (in.lbs./N•m)1,550 in.lbs./175N•m
Battery18V LXT Lithium-Ion
Overall Length4-5/8″
Net Weight (with battery)3.3 lbs.
Shipping Weight12 lbs.
UPC Code088381-827461

Makita 18V Cordless Quick-Shift Mode 4-Speed Impact Driver Kit XDT12M Resources

XDT12 Instruction Manual
XDT12 Parts Breakdown
Makita XDT12M New Tool Flyers (English)

Weight12.0 lbs
Dimensions5.75 × 16.7 × 12.5 in
Brand

Makita