Cyclone Zero Tolerance Wheels
Cyclone Zero Tolerance Wheels are available with resin to reduce vibration or segmented for aggressive stock removal. For Wet use only. Perfectly balanced with zero vibration, these wheels have a ⅝” -11 thread with center water feed for use on any standard tool. These Drum Wheels are the quickest alternative to remove material after cutting out sink holes. Not to mention the quickest way to shape a radius on an outside edge. Aggressive cutting and rapid stock removal action for use on handheld machines. Provides a smooth finish for an easy final polish.
Zero Tolerance Wheels are designed for stock removal on Granite or Hard Stone: Grinding away excess Stone to prepare for polishing.
Cyclone is the premium line of Diamax products, a well-established company in the USA since 1996, which has gained them a superb reputation among the stone fabrication community, with a return ratio of less than 1%. You might also want to check our other Grinders & Shapers.
Wheels Features
Among the main features of these Wheels, we find:
- Ideal for heavy stock removal and material clean-up. The aggressive multi-segment design increases life and performance.
- The most popular tool for truing vanity sink cut-outs
- ⅝” -11 thread with center water feed
- Available with resin to reduce vibration or segmented for aggressive stock removal
- Balanced to eliminate vibration
- Recommended use: Oscillate wheel up & down to wear evenly & avoid grooves
Zero Tolerance Wheels Technical Specifications
ITEM # | SIZE | GRIT | SEGMENT | FITTING | MAX RPM |
---|---|---|---|---|---|
SRWC1158 | 1″ x 1 ⅝” | Coarse/Med 50/60 | Resin filled | ⅝” -11 thread | 8,000 |
SRWC1NR | 1″ x 1 ⅝” | Coarse/Med 50/60 | No resin | ⅝” -11 thread | 8,000 |
SRWC2158 | 2″ x 1 ⅝” | Coarse/Med 50/60 | Resin filled | ⅝” -11 thread | 8,000 |
SRWC2NR | 2″ x 1 ⅝” | Coarse/Med 50/60 | No resin | ⅝” -11 thread | 8,000 |
SRWC3158 | 3″ x 1 ⅝” | Coarse/Med 50/60 | Resin filled | ⅝” -11 thread | 8,000 |
SRWC3NR | 3″ x 1 ⅝” | Coarse/Med 50/60 | No resin | ⅝” -11 thread | 8,000 |
Reviews
There are no reviews yet.