Tenax Protex
Tenax Protex is one of the top premium sealers on the market today. Tenax Protex is suitable for the treatment of all types of stone. It works extremely well on smooth stones, such as Pietra Leccese, Pietra Vicenza, limestone, and similar stones for both indoor and outdoor. After the application, a slight increase of color can be seen but depends on the type of stone and where the product is applied. UV Stable.
You might also want to check the extensive line of Sealers and Impregnator.
Directions
This product must be evenly applied on a completely clean and dry surface. Spread Tenax Protexl evenly with brush, sponge, cloth, or spray gun until surface no longer absorbs product. After a few seconds buff with a clean cloth. Any excess of it creates superficial glossy and sticky films so any excess must be removed immediately after the application. Repeat twice after 10-15 minute intervals. Do not walk on the floor for 24 hours.
Shelf Life
This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity, and sunlight.
Technical Information for Tenax Protex
| Technical Information | |
|---|---|
| Density at 77° g/cm3 | 0.8 |
| Aspect | Liquid |
| Color | Transparent/opalecent |
| Quantity to be used | Normally with 1 liter is possible to treat 20-30 square meters of stone. The consumption depends a lot on the porosity of the material. |
Please read the Safety data sheet before usage.
Reviews
There are no reviews yet.