Tenax Hydrex is a penetrating sealer that prevents liquids (stains) from penetrating into the material through its micro-porosities. It’s both waterproof and oilproof. Excellent for granite, carrara, Thassos, Trani, Botticini, marfill and similar stones. It is especially effective on polished granite and polished marbles. Hydrex allows the stone to breathe to maintain its natural characteristics. It may be used both indoors and outdoors. It does not change the color of the stone. Hydrex operates on the surface of materials.
This product must be evenly applied on a clean, dry surface. Spread Tenax Hydrex Stone Sealer evenly using a clean sponge or cloth. Apply until the surface no longer absorbs the product. Immediately clean/buff with a clean dry cloth. Excess products may create a superficial glossy and sticky film so it is important to remove excess immediately after application. After waiting 10-15 minutes repeat the procedure. If used on floors wait 24 hours before walking on the surface.
1 liter of Tenax Hydrex Stone Sealer will treat approximately 215-323 square feet of stone depending on the porosity of the stone.
When using Tenax Hydrex Stone Sealer for the first time we suggest testing on a small hidden area first.
This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity, and sunlight.
Technical information for Tenax Hydrex
|Density at 77° g/cm3||0,80|
|Quantity to be used||Normally with 1 liter is possible to treat 20-30 square meters of stone. The consumption depends a lot on the porosity of the material.|
Please read the Safety data sheet before usage.